The best truck bed slide out drawers for tools bring the gear to you instead of making you climb into the bed. After putting ten of these systems side by side, the DECKED Truck Bed Storage System takes our top spot for real tool organization, the Last Boks full size cargo box wins for proven pull-out convenience, and the Rough Country dual trays take the value slot. Two of those three are not traditional drawer cabinets, and that is the single most important thing to understand before you buy.
Here is the problem with shopping this category. When you search for truck bed slide out drawers, most of what comes back is not a drawer at all. It is a molded plastic tray that slides rearward on a bed liner or on a set of rails. Only a handful of products are true drawer cabinets with individual slides, and one of the ten in our roundup has five separate drawers. We reviewed all ten, kept the real naming straight, and flagged which ones genuinely organize hand tools versus which ones just move cargo around.
We spent weeks comparing ratings, review counts, load ratings, materials, dimensions and install methods across the full lineup, then checked each against the fitment questions that trip people up most: bed length, drilling, and whether the weight kills your payload headroom. We also looked at how each one plays with a bed liner and whether it can be removed when you sell the truck.
If you want the short version: the DECKED system is the strongest truck bed drawer system for tools, the UWS box is the only true five-drawer cabinet here, and the BEDSLIDE Slide Classic is the right pick when your cargo already lives under a tonneau cover. We have covered slide systems more broadly in our guide to the best truck bed slide systems, and the wider bed accessory market in our truck bed extender guide.
Top 3 Truck Bed Slide Out Drawers For Tools (October 2026)
DECKED Truck Bed Storage System
- Full bed-length drawers
- 2000 lb flat deck
- Recycled HDPE on steel frame
All 10 Truck Bed Slide-Out Drawer Systems Compared in 2026
Every system below pulls rearward toward the tailgate, but they differ sharply in what they carry and how they mount. Read the key features column before you scroll into the detail, because the difference between a 1000 lb steel rail tray and a 4 inch plastic tray is the difference between a flatbed contractor setup and a weekend hauling aid.
| Product | Specifications | Action |
|---|---|---|
| DECKED Truck Bed Storage System |
|
Check Latest Price |
| Last Boks Full Size Cargo Box |
|
Check Latest Price |
 Bedslide Slide Classic |
|
Check Latest Price |
 VEVOR Sliding Truck Bed Organizer |
|
Check Latest Price |
 Rough Country Slide-Out Cargo Trays |
|
Check Latest Price |
 VEVOR 39 Inch Aluminum Tool Box |
|
Check Latest Price |
 UWS EC20041 Five-Drawer Box |
|
Check Latest Price |
 Maxzina Slide-Out HDPE Trays |
|
Check Latest Price |
 LECARDIO Heavy Duty Slide-Out Trays |
|
Check Latest Price |
 KOKSHELY 56 Inch Cargo Tray |
|
Check Latest Price |
1. DECKED Truck Bed Storage System – Best Overall for Tools
DECKED Truck Bed Storage System Includes System Accessories | Compatible with Ford F150 (2015-current) 6’6″
Pros
- Highest rated system in the group at 4.8 stars
- Full bed-length drawers with a 2000 lb flat deck above
- Includes dividers
- bins
- D-Co cases and D-ring tie-downs
- Waterproof with updated seals
- Lifetime manufacturer warranty
Cons
- Only fits the exact truck
- year and bed length it is built for
- Keyed lock is a separate accessory
- Fixed in place once installed
This is the only system in our roundup that does exactly what the phrase truck bed drawer system implies. Six compartments run the full length of the bed, and the top of the unit is a flat deck rated at 2000 pounds, so you can stack bulk cargo on the roof of the tool cabinet rather than losing the whole bed to storage.
The build is the story here. Recycled HDPE drawers are co-molded onto a galvanized steel sub-frame, which means the moving parts sit on metal while the boxes that take abuse stay plastic. The drawers are waterproof, and owners consistently call out the updated seals and closeout panels as the reason their gear stays dry through a full season of rain and road spray.
What you get in the box matters more than usual here, because the accessory ecosystem is part of the value. The package includes two D-Co cases, a drawer bin, two dividers, four stash bins and four D-ring tie-downs. That is enough to organize a real service kit on day one without a second purchase.
The 4.8 star average across 402 reviews is the highest in this roundup, with roughly 87 percent of those reviews at five stars. The lifetime manufacturer warranty and Made in USA construction are the two things enthusiasts mention first when they defend the spend.
Who the DECKED system actually suits?
This fits a contractor or mobile mechanic running a Ford F-150 from 2015 onward with a 6 foot 6 inch bed, and it suits them almost exactly. If your work involves climbing into the bed for a wrench more than once a day, the accessibility alone justifies it. Forum owners repeatedly describe the same benefit in their own words: the gear comes to you, so you do not climb in.
It also fits an overlander who wants a hard, lockable cabinet that can double as a base for a sleeping platform. Because the drawers are the full bed length, the deck above is flat and rated for serious weight.
Where the DECKED system falls short?
Fitment is the hard limit. The unit is vehicle-specific, so it has to match the make, model, year and bed length exactly, and the keyed lock is an optional add-on rather than part of the package. Once the system is in the bed it is not a removable item, which matters if you plan to sell the truck or move the setup to a different vehicle.
It is also the most expensive unit we looked at, and that gap is real. But it is the gap between a tool cabinet and a plastic tray, and the six-compartment layout has no equivalent in this group.
2. Last Boks Full Size Cargo Box – Best Proven Pull-Out
Pros
- Slides fully out onto the tailgate for ground-level access
- 1656 reviews at 4.7 stars
- Weighs about 10 lb and can be hosed off
- Made in USA from high molecular weight polyethylene
- Protects the bed liner from spills and mud
Cons
- Needs a tonneau cover or truck cap to operate safely
- A cargo box rather than a divided tool drawer
- Full-size unit will not fit GM beds with wheel well storage
The Last Boks cargo box is the most proven slide-out unit in this roundup by a wide margin, with 1656 reviews averaging 4.7 stars and about 84 percent of those at five stars. The mechanism is simple and effective: the box sits in the bed under a cover and rolls rearward until it is sitting on the tailgate, so the full contents are at ground level without climbing.
Material is high molecular weight polyethylene with a skid-resistant cap, and reviewers consistently praise how light it is at roughly 10 pounds. That weight matters more than it sounds. You can pull a loaded box to the tailgate, hose it out and put it back without a second pair of hands.
The bed protection is the sleeper benefit. Owners who haul muddy gear, wet lumber or dirty equipment point out that the box keeps everything off the bed floor, which protects the liner and stops grit from migrating into the cab. The same reviewers flag the safety caveat without exception: running it with the tailgate open on a public road is only sensible behind a tonneau or cap.
Fitment is broad across the major half-ton and three-quarter models, including Ford F-150, F-250 and F-350, Chevy Silverado, GMC Sierra, Ram 1500 and 2500, the Toyota Tundra and the Nissan Titan. GM trucks with storage behind the wheel wells need the mid-size version instead.
Who the Last Boks box works for?
This is the right pick for a service or fleet truck that carries parts, consumables and a first-aid kit rather than a full mobile workshop. It is also the smart choice if your tools already live under a bed cover, because it simply gives you access to them without unhooking anything.
Owners with back problems call out the same benefit repeatedly. Reaching cargo at ground level instead of leaning over a bed rail is a real quality-of-life difference, and several reviewers say that alone drove the purchase.
Where the Last Boks box is not a drawer?
Be clear about what you are buying. This is a cargo box, not a tool drawer. There are no internal dividers, no individual slides and no per-drawer organization, so every socket in the box competes with every other one for the same floor space.
It also cannot be used with the tailgate down on the road, and it competes directly for the same cubic volume as a chest-style tool box like the VEVOR unit in position six. If your priority is organized hand tools, look at the DECKED or UWS units instead.
3. Bedslide Slide Classic – Best for Under-Bed Cover Access
Pros
- 1000 lb capacity rating across the deck
- Composite build resists rot and corrosion
- Latch closure keeps cargo contained under a cover
- Universal fit designation
Cons
- Only 89 reviews
- Costs more than the plastic tray options in this group
- Designed to operate under a tonneau or cap
- Single platform rather than a pair of trays or true drawers
The Bedslide Slide Classic is built for one specific job: bringing cargo forward from underneath a bed cover so you do not have to open, unhook and re-strap a tonneau every time you want a drill. It is listed as a universal fit with a composite body and a latch closure, and it carries a 1000 pound rating, which is the highest tray capacity in this roundup.
Composite construction is the quiet advantage. It will not rot, will not corrode and will not check or split in winter the way untreated plywood trays can, which matters a great deal for anyone storing gear through a northern winter with road salt on the roads.
The rating is strong at 4.6 stars, with about 83 percent of reviews at five stars, but the review base is only 89. That is a meaningfully thinner sample than the Last Boks or VEVOR chest, and it is worth knowing that the fitment story is a designation rather than a truck-by-truck match list.
You will also notice this is a single slide platform rather than a pair of trays. That keeps the load path simple and rigid, but it means bulky items and small hand tools are not separated the way they are in a dual-tray setup.
Who should buy the Bedslide Slide Classic?
If you already run a tonneau cover or a truck cap and you have grown tired of the ritual of opening it, this solves a genuine daily friction. It also suits a mobile mechanic who carries heavy components in a single crate and wants that crate at the tailgate without touching the cover hardware.
Because it is a 1000 pound platform, it can also serve as a structural base under a camper or overland build, which is exactly how a lot of DIY owners use a bed slide.
Where the Slide Classic disappoints?
It costs more than most of the plastic trays in this roundup while offering no dividers, which is a hard sell if your goal is tool organization rather than cargo access. The 89-review base also means you have less long-term data to rely on than with the Last Boks or the VEVOR chest.
And it delivers its benefit only when the bed is covered. Running it in an open bed is possible but pointless, because you lose the containment the latch is designed to provide.
4. VEVOR Sliding Truck Bed Organizer – Best for Heavy Loads
Pros
- Steel and aluminum build holds 1000 lb without deforming
- Two slide positions reach about 80 percent of bed space
- 6 movable tie-down rings around the perimeter
- Low 8.86 inch profile
Cons
- Requires drilling into the bed
- Only 35 reviews
- Weighs 153.9 lb so installation is a two-person job
- Will not fit without measuring between wheel arches
This is the most serious piece of hardware in the roundup. The VEVOR organizer is a 65 by 48 inch tray built from aluminum and steel, rated to 1000 pounds, and it runs on a two-position rail that extends far enough to use roughly 80 percent of your bed. Six movable tie-down rings let you pin fuel drums and toolboxes in place when the slide hits its stops.
The two-position rail is the design that makes this different from a plain tray. Instead of one long extension, you get a choice of two detents, so you can reach the back of a load or pull the whole deck out. For heavy material, that rigidity is the point.
The catch is that this is a permanent installation. Drilling is required, and at 153.9 pounds it is a two-person job, which is a meaningful weekend project rather than an afternoon bolt-on. If you rent your truck or plan to sell it, that drilling is a real cost.
Measurement is the other non-negotiable step. The manufacturer explicitly asks you to measure between the wheel arches and from the bulkhead to the tailgate before buying, and the reviews reflect that advice: owners who measured first tend to be happy, and the lower ratings cluster around fitment.
Who the VEVOR organizer is built for?
This belongs in a contractor truck that hauls rock, sand, lumber or fuel on a regular basis. The 1000 pound rating and the tie-down rings mean the load stays put on the rail under braking and over washboard roads, which no plastic tray in this roundup can promise.
It is also the right foundation if you are building a mobile workbench on top of a slide, because the aluminum and steel frame is the only surface here rated to carry a built-up structure.
Where the VEVOR organizer causes problems?
Drilling, weight and price together make this a commitment. The 153.9 pound unit is roughly fifteen times the weight of the Last Boks box, and removing it later means patching holes in your bed floor.
It is also the thinnest rated data set among the higher-capacity options at 35 reviews, with a wide spread between five and four stars. Reviewers who fit it successfully praise the rigidity; those who did not, mostly talk about measurement and installation.
5. Rough Country Slide-Out Cargo Trays – Best Value
Pros
- Two trays plus straps and carabiners included
- 4 inch profile fits under most bed covers
- Removes in seconds to restore an open bed
- 3 year Rough Country warranty
- 266 reviews at 4.2 stars
Cons
- Loose between the wheel wells on wider beds
- Thin HDPE walls flex under tension
- Molded edges can cut hands
- Hard to move when fully loaded
The Rough Country dual trays are the value pick, and the reason is simple: this is a recognizable suspension brand putting a two-tray HDPE slide on the market with a three-year warranty behind it. At a fraction of what the DECKED system costs, you get two low trays, tie-down straps and a pair of carabiners in the box.
The 4 inch profile is the feature that unlocks compatibility. It slides under most bed covers without a fight, and the two-tray layout leaves a channel down the middle of the bed so you can still load long material if you need to.
Owners like how reversible the setup feels. Pull the two trays out, the bed is a completely open bed again, which is exactly what you want on a weekend when hauling mulch or lumber matters more than organization. One F-150 owner even reports it fitting an extend cab bed alongside a folded bed extender.
At 266 reviews and 4.2 stars, this is the largest review base among the affordable tray options, which makes the pattern in the complaints unusually clear rather than anecdotal.
Who the Rough Country trays suit?
They suit a weekend hauler who wants reach without permanence. If your tools are hand tools and consumables, a pair of strapped trays beats rummaging through a bare bed, and the straps keep small parts from migrating under the wheel wells on a washboard road.
They are also a sensible first purchase for anyone who is not yet sure a full drawer system is worth it to them. Nothing is drilled, nothing is heavy, and the trays come out in seconds when the bed needs to be a bed again.
Where the Rough Country trays fall short?
Fit is the recurring complaint. On wider beds the trays sit loose between the wheel wells, so they move side to side and add noise, and the thin HDPE walls can flex or warp under bungee tension. Owners also mention the molded edges catching hands when pulling a loaded tray.
There is no internal organization, the 500 pound rating covers the pair, and roughly 12 percent of reviews are one star. It is a hauling aid with a warranty, not a tool cabinet.
6. VEVOR 39 Inch Aluminum Tool Box – Best Locking Chest
Pros
- Category rank number 2 in Truck Bed Toolboxes
- Stainless steel lock with two keys included
- Gas strut opens the lid to 110 degrees
- Eight length and color variants from 20 to 49 inch
Cons
- Thin aluminum gauge despite the heavy-duty branding
- Latch can pop open under road vibration
- No gasket so it is not reliably waterproof
- Listed exterior height runs about 2 inch taller than the real box
This is not a slide-out unit, but it is the most reviewed tool storage product in the group and the most practical companion to one. The VEVOR 39 inch aluminum chest is a diamond plate box with a stainless steel lock, two included keys and a gas strut that holds the lid open to 110 degrees, and it carries 926 reviews at 4.1 stars.
The gas strut is worth calling out. On a chest at tailgate height, a lid that stays put on its own means you can both hands-load a tray of sockets instead of holding a lid with your hip. The side handles are also shaped to be gripped with gloves on, which is the detail that matters on a job site.
Fitment is the strongest part of the design. The same chest is available in 20, 30, 39, 48 and 49 inch lengths in black and silver, so matching the box to your bed width and your available length is a matter of choosing a variant rather than hunting for a model.
Diamond plate aluminum with a double-sided powder coating handles rust and abrasion well, and for anyone storing tools through a road-salt winter that coating is doing more work than most buyers realize.
Who should pair a chest with their bed storage?
Pair it with a slide tray and the two solve different problems. The tray moves a load forward; the chest keeps small, valuable, ordered tools dry and locked. That combination is what a lot of owners in the forums end up with, and it is a cheaper path to a professional-looking setup than a full drawer cabinet.
It also suits anyone whose priority is theft deterrence rather than capacity, since the lock is standard rather than an add-on.
Where the VEVOR chest is not what it claims?
It is rated 4.1 stars, and 10 percent of reviews are one star with another 7 percent at two stars. The complaints cluster in a tight group: thin sheet metal despite the heavy-duty branding, a latch that can pop open under road vibration, and no real gasket where the lid meets the box, which means it is listed as waterproof but does not behave like it in sustained rain.
Also check the listed height. Buyers report the advertised exterior height can run about 2 inches taller than the actual box, which can matter under a low-profile bed cover.
7. UWS EC20041 Five-Drawer Box – Best True Drawer Unit
Pros
- The only genuine five-drawer tool box in the roundup
- One-piece welded 0.058 inch heavy-wall aluminum
- Stainless steel ball-bearing drawer slides
- Lockable stainless steel T-handle
- Mounts in a bed
- van
- on a bench or in a garage
Cons
- Only 26 reviews
- Slide tracks have detached from the body for some owners
- Arrival damage and a crooked riveted hinge reported
- Bottom drawer arrived open for one buyer
The UWS EC20041 is the closest thing in this roundup to the classic American truck tool box, and it is the only product here with five individual drawers: two shallow 2 inch drawers and three deeper 3 inch drawers, all commercial-grade injected plastic, all riding on stainless steel ball-bearing slides.
That slide hardware is the real differentiator. Ball-bearing slides stay smooth under load and do not sag the way friction slides do once a drawer is packed with torque wrenches. Owners who receive an undamaged box consistently praise the heavy-wall 0.058 inch one-piece welded aluminum body, which is thicker than most competing aluminum cabinets.
Why the UWS box is the organizer of this group?
A shallow top drawer is for the things you reach for twenty times a day: a tape measure, a marker, a flashlight, a socket wrench. A deep bottom drawer is for the heavy irregular items nobody wants to lift over a sidewall. That is the layout logic that separates a real truck bed toolbox with drawers from a box that just happens to have one big cavity.
At 1.5 cubic feet and 33 pounds, it also mounts in a cargo van, on a workbench or in a garage, so the same cabinet can move with you between the shop and the truck. The lockable stainless steel T-handle secures the whole stack, and mounting hardware is included.
Where the UWS box disappoints?
At 26 reviews, this is the smallest rating base in the roundup, and that makes the distribution volatile: 66 percent five star, but 11 percent one star and 10 percent two stars. The complaints are almost entirely about arrival rather than design, including detached slide tracks, a crooked riveted hinge, a box stuck to its inner packaging and one bottom drawer arriving open.
It is also not a slide-out unit. It is a cabinet you place in the bed, which means loading it means reaching past it. Pair it with one of the slide trays if you want both the drawers and the access.
8. Maxzina Slide-Out HDPE Trays – Best Budget
Pros
- An inexpensive full-width slide tray option
- Tool-free installation with no drilling
- Straps attach straight to bed hooks
- Twin trays leave tailgate room for loading
- Three sizes including a 52.91 inch short-bed version
Cons
- Very light plastic with no underside runners
- Straps described as cheap and untrustworthy
- Can scratch a hard bed liner
- Fiddly assembly with minimal instructions
- Trays can bow when empty
The Maxzina trays exist to prove a point: you do not need a rail system to get reach in your bed. Four HDPE pieces pair into two trays that sit inside the bed on either side, held in place by straps on the factory bed hooks, with the length adjustable and no drilling anywhere in the process.
Because the trays sit inside the bed on the liner rather than on a rail, they work over a bed rug without marking it, and one owner reports rolling a 200 pound case out to the tailgate without strain. Three size options are offered, including a 52.91 inch tray for shorter beds.
At 4.0 stars from 82 reviews, this is the lowest-rated pick in the roundup, with 12 percent two star and 10 percent three star. Even so, most owners describe it as a genuinely useful cheap answer to the reach problem, especially for reaching cargo under a bed cover or keeping golf bags off a rough liner.
The warranty is modest at 30 days against shipping damage or normal-use breakage, which is a fair signal of what this is. Treat it as a plastic accessory, not a piece of equipment with a decade of service life in it.
Who the Maxzina trays are right for?
They suit an owner who wants to try the pull-out concept for almost nothing and can live without dividers. A weekend camper, a hauler who wants to keep muddy gear contained, or anyone whose truck is rented and cannot be drilled into are all good fits.
Because the two trays are independent, you can use one and remove the other, which is handy when a load needs the full bed width.
Where the Maxzina trays fall short?
There are no runners on the underside, so in an open bed the trays can slide or shift if you do not tie them down, and the included straps are the weak point in the whole package. Owners also mention the trays bowing or twisting when empty, the assembly using numerous small nuts, bolts and spacers with minimal instructions, and the plastic scratching a hard bed liner.
It is also explicitly excluded from the Chevrolet Colorado, Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger and Honda Ridgeline. If you drive one of those, the LECARDIO trays in position nine or the KOKSHELY platform in position ten are better bets.
9. LECARDIO Heavy Duty Slide-Out Trays – Best No-Rail Install
LECARDIO Heavy Duty Slide-Out Truck Bed Cargo Tray,Pull-Out Storage Organizer for Pickup Trucks,Fits 5’5″ Beds & Longer, Cargo Bed Slide
Pros
- Slides on the bed floor with no rails and no drilling
- Complete hardware kit including a wrench and Allen key
- 800 pound combined rating across the pair
- Works over a bed liner or bed rug
- Reviewers with back problems report not climbing into the bed
Cons
- Thin light plastic with no rollers
- Open unfinished underside catches on things
- Tall items can tip off the tray lip when extended
- Strapping across the trays can crack the plastic
The LECARDIO pair takes a different route from every other tray here. Instead of a rail or a strap-only setup, the two 24 inch wide trays slide directly on the bed floor and are secured with U-hooks, tension straps and fixing straps, which means it works over a bed rug without drilling and without marking the liner.
The included hardware is unusually complete for this category: 12 U-hooks, six tension straps, two fixing straps, a wrench, an Allen key and 24 bolts, nuts and washers. You are not hunting for parts after delivery, and the combined rating of 800 pounds across both trays is higher than most plastic competitors claim.
It fits 5.5, 5.6 and 5.7 foot beds and longer, including the Ford F-150, and the warranty is one year. Several owners with back problems describe the same result: they no longer climb into the bed to reach a tool, which is the whole point of a pull out truck bed storage system.
At 4.2 stars from 54 reviews with 59 percent at five stars, the feedback is consistent enough to plan around: owners love the no-drill, no-rail design and are cautious about the material.
Who should choose the LECARDIO trays?
Choose these if you cannot drill your bed, if you have a bed rug you refuse to mark, or if you already run a full drawer system and want a second slide layer alongside it. Several owners combine them with a DECKED installation for exactly that reason, using the upper deck for heavy bulk and the trays for the gear that gets grabbed daily.
The 26 pound weight is high enough that the trays stay put under load, which addresses the main complaint owners raise about lighter strap-mounted trays.
Where the LECARDIO trays are weak?
There are no rollers, and the underside is open and unfinished, so it snags on debris and on a textured bed liner. Owners with heavy loads on a bed rug report that friction makes sliding difficult, and strapping across the thin plastic can crack it.
The failure mode to plan for is the tray lip. When a tray is pulled fully out, items near the tailgate end can tip off, so tall or heavy gear belongs at the front of the tray. Several buyers also call thin plastic at this capability level overpriced, which is fair criticism of the category in general.
10. KOKSHELY 56 Inch Cargo Tray – Best for Short Beds
Pros
- Single wide platform spans the bed instead of splitting it
- 1.9 inch profile clears under most bed covers
- Molded non-slip texture reduces cargo shift
- Elastic cargo net and open hooks for quick securing
- Three sizes including a 61.72 inch version
Cons
- Only 47 reviews on a relatively new listing
- 1.9 inch thin panel is a flat platform with no walls
- Sized for 5 foot and shorter beds
- Elastic net and hooks are weak for heavy loads
The KOKSHELY tray is the odd one out in this roundup because it is a single wide platform rather than a pair of narrow trays. At 56 by 42.9 inches and only 1.9 inches tall, it spans the bed floor in one piece, which means you can slide a long toolbox, a case of fasteners or a duffel across the full width instead of balancing it on two trays.
The 1.9 inch profile is the lowest in the roundup, so it clears under essentially any bed cover. The molded non-slip surface texture is a thoughtful touch that reviewers credit with reducing cargo movement over rough roads, and the open hooks plus the included elastic cargo net make quick securing possible without permanent hardware.
At 4.3 stars from 47 reviews with 63 percent at five stars, the feedback is favorable but the data set is small and tied to a relatively new listing. Three sizes are available at 55.98 by 41.96 inch, 56 by 42.9 inch and 61.72 by 46.25 inch, so longer-bed owners can move up a size rather than buying a different product.
Material is black HDPE rated for water, UV and abrasion resistance, which is the right call for a panel that will sit in a wet bed for years.
Who the KOKSHELY platform works for?
It suits a short-bed owner who has been told that full-width trays are too wide, and it suits anyone who loads one long, heavy item rather than a mixed tool kit. A 56 inch platform can carry a full-size toolbox or a long case of power tools straight to the tailgate with one pull.
It is also a reasonable pairing with a bed cover, since nothing is tall enough to interfere with the rails or the latch.
Where the KOKSHELY platform is not enough?
At 1.9 inches it is a flat panel with no walls, so loose items will not stay contained when the bed is open and the truck is moving. The elastic net and open hooks are a convenience for light loads, not a substitute for ratchet straps on anything heavy.
The sizing is the real limit. This tray is built for 5 foot and shorter beds, which rules it out for 6 foot and 8 foot trucks entirely. And with 47 reviews, you have one of the thinnest long-term data sets in the roundup.
What Is a Truck Bed Slide-Out Drawer System?
A truck bed slide-out drawer system is storage that mounts in the bed and rolls rearward toward the tailgate, so you reach your gear at waist height instead of climbing in. There are three distinct forms, and telling them apart is the first step to buying the right one.
True drawer cabinets like the DECKED system and the UWS box contain individual drawers on their own rated slides. You pull a drawer out and everything in it comes with it, and the drawers can be organized with dividers so a socket does not end up under a box of sandpaper. This is the only form that genuinely delivers tool organization.
Slide-out cargo trays like the Rough Country, Maxzina, LECARDIO and KOKSHELY products move a whole platform. They are excellent for reach and for keeping cargo off the bed liner, but they have no internal dividers, so every loose item shares one flat surface.
Bed slides under a cover like the BEDSLIDE Slide Classic and the VEVOR organizer are structural platforms, often rated from 500 up to 1000 pounds, that bring a load forward from beneath a tonneau or a rail-mounted position. The BEDSLIDE is designed around the cover; the VEVOR unit is a rail system built for heavy material.
The word drawer in a product title does not guarantee a drawer. Check for the number of individual drawers, the type of slide hardware and whether there are dividers before you commit. Two of the highest-rated items in our roundup are cargo boxes with no drawers at all.
How to Choose: 7 Things to Check Before You Buy?
1. Drawer count and slide load rating. If you want organized tools, count the drawers and find the per-drawer rating. Forum owners quote 200 pounds per drawer as the practical figure for a heavy duty system, and anything above that gets sluggish. Ask also whether the drawer boxes are removable, because removable boxes turn a drawer unit into a parts bin you can carry to the tailgate.
2. Payload math against your door sticker. This is where most roundups go quiet, and it is the question owners ask most. Add the system weight to your expected tool load and compare the total to the payload number on the driver door jamb sticker, not to towing capacity. The VEVOR organizer alone weighs 153.9 pounds, the UWS box 33 pounds and the LECARDIO pair 26 pounds, and every pound of that comes out of the same budget as your passengers and your hitch load. Exceeding payload hurts the rear springs, the tailgate assist and the frame over time.
3. Bed length and bed width fitment. Measure the usable length between the wheel arches and the bulkhead, and measure the width at the narrowest point, not at the tailgate. The VEVOR organizer at 65 by 48 inches needs both numbers before you order. The KOKSHELY tray is built for 5 foot and shorter beds, the Maxzina and LECARDIO trays cover 5.5 foot and longer, and the Last Boks full size box does not fit GM beds with storage behind the wheel wells.
4. Drilling or no drilling. No-drill was a hard requirement for the DIY builders we found, and it matters for anyone who rents their truck or intends to sell it. The Rough Country, Maxzina, LECARDIO, Bedslide and Last Boks units all avoid permanent modification. The DECKED system and the VEVOR organizer both bolt to the bed, and the VEVOR unit requires drilling.
5. Extension percentage and how much of the bed you keep. The VEVOR rail is a two-position system reaching about 80 percent of bed space. The KOKSHELY platform is a full-width single panel. The Last Boks box rolls entirely onto the tailgate. Full extension is the easiest to use, but it takes up the most length when retracted, so a dual-tray layout is often the smarter compromise in a short bed.
6. Materials and weather resistance. HDPE and polyethylene will not rot or corrode and are cheap, but thin walls flex. Aluminum is stiffer and heavier, and heavy-wall welded aluminum at 0.058 inch is a different product from thin stamped sheet. Composite is rot and corrosion resistant without the weight of steel. Whatever you choose, check the warranty length as a proxy for how the manufacturer expects it to be treated, and note that the range here runs from a 30 day warranty to a lifetime.
7. Security and tool access. A lockable drawer or chest protects expensive hand tools, but a sliding tray is only as secure as the bed cover over it. If you are leaving a full set of power tools unattended, the DECKED system with its keyed lock or the lockable VEVOR chest are the options here that address theft directly. A third consideration is whether the unit can be removed and resold with the truck, which is a fair question for anyone who changes vehicles every few years.
How to Organize Tools Inside the Drawers and Trays?
Storage that reaches you is only half the win. What you put in it decides whether the setup works in month three or gets abandoned. A simple discipline beats a complex one.
Assign one category per drawer and never mix them. Shallow top drawers take the daily drivers: tape measures, markers, flashlights, a socket wrench, a spare battery charger. Deep drawers take heavy irregular items: a torque wrench, a ball peens hammer, a pry bar set. The bottom drawer is the one you open least, so put consumables there.
For a true drawer cabinet, buy the dividers the manufacturer offers before you buy anything else. The DECKED package already includes two dividers, a bin, four stash bins and four D-rings, and that set is enough to keep a full service kit sorted. For chest boxes, cut two pieces of closed cell foam and cut channels for the tools you use every day, because loose tools in a chest are tools you will dig for.
On trays, low walls mean straps and nets matter more than organizers. Use ratchet straps rather than bungee cords on anything that can move under braking, and put tall or heavy items at the front of the tray so they cannot tip off the lip when the tray is extended. Keep a small parts bin on the tray nearest the tailgate, because that is the one you will reach for most.
Finish the setup with a seasonal pass. Clear drain holes, check the lock mechanism, and lubricate the drawer slides once a year so a drawer that worked in September still works in February. Owners in cold climates report that this is the difference between a system you use all year and one that stays closed until spring.
Frequently Asked Questions
Who makes the best truck bed drawer system?
For true tool drawers, DECKED is the strongest all-round choice: six full bed-length compartments, a 2000 pound flat deck above, waterproof recycled HDPE drawers on a galvanized steel frame and a lifetime warranty, rated 4.8 stars from 402 reviews. If you want the only genuine five-drawer cabinet in a smaller footprint, the UWS EC20041 is the alternative, with ball-bearing slides and a lockable handle.
What is the best way to store tools in a truck bed?
Use a combination: a lockable drawer cabinet for organized hand tools, a chest box for valuable small items, and a slide-out tray for bulky gear that would otherwise roll around the bed. Keep heavy items low and forward of the axle, secure anything loose with ratchet straps, and leave the bulk of the bed flat so you can still haul material. This is the layout most contractor setups converge on.
Which truck bed slide is the best rated?
The BEDSLIDE Slide Classic holds a 4.6 star average from 89 reviews and is rated to 1000 pounds, and the VEVOR Sliding Truck Bed Organizer matches that 1000 pound rating with a 4.4 average from 35 reviews. The VEVOR unit adds a two-position rail and six tie-down rings but requires drilling. The BEDSLIDE is lighter-duty in build but rated to 4.6 stars and needs no installation at all.
What are the best heavy-duty slides for truck beds?
For genuinely heavy material, the VEVOR Sliding Truck Bed Organizer is the strongest: aluminum and steel construction rated to 1000 pounds across 1000 lb / 453.6 kg, a two-position rail reaching about 80 percent of bed space and six movable tie-down rings, at 153.9 pounds installed. It requires drilling and two people to fit. The BEDSLIDE Slide Classic is the lighter option for cargo under a cover.
Do truck bed drawers hurt payload?
They can, and the number that matters is on the driver door jamb sticker. Add the system weight to your tool load: the VEVOR organizer is 153.9 pounds, the UWS box 33 pounds, the LECARDIO tray pair 26 pounds and the Maxzina pair 20.5 pounds. Exceeding payload over time loads the rear springs, tailgate assist and frame, so check the sticker before you order, not after.
Can you install truck bed drawers without drilling?
Yes for most tray-style systems. The Rough Country dual trays, the Maxzina trays and the LECARDIO pair all mount with straps, hooks or sliding onto the bed floor, and the Bedslide and Last Boks units need no modification at all. True drawer cabinets are different: the DECKED system bolts to the bed, and the VEVOR organizer requires drilling. No-drill is a hard requirement in the DIY community, so check the method before you buy.
What size truck bed drawer fits my truck?
Match the bed first, then the system. The KOKSHELY 56 by 42.9 inch platform is built for 5 foot and shorter beds, the Maxzina and LECARDIO trays cover 5.5 foot and longer, and the DECKED system is vehicle-specific, fitting the Ford F-150 2015-current with a 6 foot 6 inch bed. Measure between the wheel arches and from the bulkhead to the tailgate before ordering, and check whether your truck has storage behind the wheel wells.
Is UWS or Camlocker better?
Among the products in this roundup, UWS is represented by the EC20041 five-drawer aluminum box, which uses 0.058 inch one-piece welded aluminum and stainless steel ball-bearing slides with a lockable T-handle, rated 4.1 stars from 26 reviews. Its weakness is consistency rather than design, with reports of shipping damage and detached slide tracks. Compare build materials and slide hardware first, since a small review base makes star averages volatile.
Final Verdict: The Truck Bed Storage Setup Worth Building
After comparing all ten, the best truck bed slide out drawers for tools depend on one question: do you need organization or reach? If you need organized hand tools, the DECKED Truck Bed Storage System is the clear answer, with six full bed-length compartments, a 2000 pound deck and the highest rating in the group at 4.8 stars. The UWS EC20041 is the compact alternative when five ball-bearing drawers matter more than bed coverage.
If you need reach, the Last Boks cargo box has the largest proven review base in the roundup with 1656 reviews at 4.7 stars, the Rough Country dual trays are the value answer at 4.2 stars from 266 reviews, and the VEVOR organizer is the only unit here built to move 1000 pounds of material. Check the payload sticker on your door jamb before any of it goes in, and measure between the wheel arches first.
Whichever you choose, the accessories and dividers are what turn storage into a system. If you are still working out the rest of the build, our truck camper jack guide covers the hardware that pairs well with a loaded bed.
Related Articles
