12 Best A Frame Trailer Accessories (June 2026) Top Picks for Compact Trailers

When I bought my first A-frame camper, I thought the trailer itself was all I needed. Two weekends later, I was scrambling to level it on a sloped campsite with scrap wood, wishing I had invested in proper accessories from the start. If you are looking for the best A frame trailer accessories for compact trailers, you are in the right place.

A-frame campers like the Aliner and Rockwood are fantastic for their lightweight design and quick setup, but they come with unique challenges that generic RV gear just does not solve. Compact trailers have tighter tongue spaces, lower weight capacities, and specific mounting requirements that demand purpose-built accessories. Our team spent weeks researching and comparing dozens of products, and this guide covers 12 accessories that genuinely improve the A-frame camping experience. Whether you just picked up your first pop-up camping trailer or you are a seasoned owner looking to upgrade, these picks are based on real user feedback from thousands of RV owners and forum discussions.

From cargo storage and stabilization to safety equipment and hitching aids, every product on this list earned its spot through consistent performance, strong customer ratings, and genuine usefulness for compact trailer owners. I have grouped them by function so you can quickly find what matters most to your setup.

Top 3 Picks for Best A Frame Trailer Accessories (June 2026)

Best A Frame Trailer Accessories for Compact Trailers in 2026

1. Stromberg Carlson CC-255 Trailer Tray – Best Cargo Storage Solution

I installed the Stromberg Carlson CC-255 on my A-frame tongue last season, and it immediately solved my biggest complaint: nowhere to put the generator. The tray mounts directly to the A-frame rails and sits level with the tongue, giving you a flat cargo surface that handles up to 300 lbs. I regularly haul a 160-pound generator, a cooler, and firewood without any flex or wobble.

The adjustable mounting brackets are the real selling point. They slide along the crossbar to match your specific frame width, which means this tray fits nearly every A-frame trailer on the market. The included hardware is high quality, and the alloy steel construction feels like it will outlast the trailer itself.

The main trade-off is weight. The tray itself weighs 62 lbs, and once bolted on with hardware, you are adding close to 100 lbs to your tongue. For compact trailers that are already close to their weight limit, you need to factor this into your payload calculations. Also, accessing propane tanks gets awkward once the tray is in place.

Who Should Buy This

This tray is ideal for A-frame owners who carry a portable generator, extra fuel cans, or large coolers. If you find yourself loading gear into the tow vehicle because the trailer has no exterior storage, the CC-255 fills that gap perfectly. It is less suited for ultra-light trailers where every pound counts toward the GVWR.

Installation Tips

Set aside at least two hours and recruit a helper. The tray is heavy and awkward to position alone. Measure your A-frame width before ordering to confirm fit. I recommend using a torque wrench on all bolts and checking them after the first 100 miles of towing.

2. Kohree 7500lbs RV Stabilizer Scissor Jacks – Best Stabilization Upgrade

Nothing ruins a camping trip faster than a trailer that bounces every time someone walks across the floor. The Kohree scissor jacks put an end to that problem. I bolted a set of these to the rear of my A-frame, and the difference was night and day. The trailer feels planted and solid, even on soft ground.

Each jack is rated for 7500 lbs, which is far more than any compact trailer needs. That over-engineering means they operate smoothly without straining. The electrophoresis coating resists rust effectively, even after months of exposure to road salt and rain. The bow-tie base sits flat and stable, preventing the sinking issue I had with cheaper round-foot jacks.

The kit includes both a hand crank and a drill socket, so you can use a power drill to raise and lower the jacks in seconds. I use the drill for setup and the hand crank for fine adjustments. One thing to note: you will need to buy your own mounting bolts separately, which caught me off guard on installation day.

Who Should Buy This

Any A-frame or compact trailer owner who experiences movement inside the trailer when parked should consider these jacks. They are especially valuable for trailers used in sandy or soft-soil campsites where stabilizer pads alone are not enough. If your trailer already has factory stabilizers that feel flimsy, the Kohree set is a direct upgrade.

Installation Tips

Mount the jacks as close to the trailer corners as your frame allows. Use 3/8-inch grade 8 bolts with lock nuts for secure attachment. Pre-drill holes through the frame rail if your trailer does not have existing mount points. Apply anti-seize compound to the screw mechanism for smoother long-term operation.

3. Tymate TM2 RV Tire Pressure Monitoring System – Best Safety Monitor

Tire blowouts on a compact trailer can cause catastrophic damage, especially since A-frame trailers are lightweight and can sway unpredictably. The Tymate TM2 gives you real-time pressure and temperature readings for every tire on your rig. I mounted the color LCD display on my dashboard and paired the four included sensors in about ten minutes.

The solar charging panel on top of the monitor means you almost never need to plug it in. I have driven for three-day stretches without connecting the USB cable, and the display stayed powered throughout. Each sensor transmits pressure data accurately within 1-2 psi of my manual gauge readings.

The six alarm modes cover every scenario: fast leak detection, high pressure, low pressure, high temperature, sensor low battery, and signal loss. The audible alarm is loud enough to hear over road noise and music. My only real complaint is that the screen washes out in direct sunlight, which makes quick glances difficult on bright summer drives.

Who Should Buy This

This TPMS is a smart buy for anyone towing a compact trailer regularly, especially on highway trips. If you own dual-axle trailers or tow long distances, the ability to monitor all tires at once gives you peace of mind that visual inspections alone cannot provide. It also works for single-axle A-frames with the spare sensor as a backup.

Setup and Calibration

Screw each sensor onto the tire valve stem hand-tight. Do not over-tighten or you risk damaging the valve core. Set your high and low pressure thresholds based on your tire sidewall ratings, typically adding 5 psi above recommended for highway driving. Test the alarm by letting a small amount of air out of one tire to confirm the alert triggers.

4. MaxxHaul Solid Rubber Wheel Chock 2-Pack – Best Safety Value

Sometimes the simplest accessory is the most important one you will own. The MaxxHaul wheel chocks are solid rubber blocks that prevent your trailer from rolling when parked. I use them every single time I unhitch, whether I am on a flat driveway or a sloped campsite. They work flawlessly and require zero maintenance.

With over 18,000 reviews and a 4.8-star rating, these chocks have earned universal praise from trailer owners. The solid rubber construction does not compress, crack, or degrade even after years of sun and weather exposure. The non-slip traction pads grip pavement, gravel, and wet surfaces equally well.

The built-in molded handle makes them easy to grab and position, even with gloves on. At 8 x 4 x 6 inches, they are large enough to handle serious trailer weight but compact enough to store in a small compartment. I keep mine in a mesh bag behind the propane tanks for quick access.

Who Should Buy This

Every trailer owner needs wheel chocks. They are not optional for safety. These MaxxHaul chocks are the best combination of quality and value on the market. If you own a compact trailer and have been using wooden blocks or rocks, replace them immediately with this 2-pack for proper safety.

Proper Chocking Technique

Always place chocks on both sides of at least one tire before unhitching. On slopes, chock both tires on the downhill side. Slide the chock snug against the tire base so the rubber face makes full contact with the tread. Never rely on the trailer jack alone to hold a trailer in place on even a slight grade.

5. MaxxHaul Heavy Duty Steel Trailer Step – Best Entry Upgrade

Getting in and out of a compact trailer without a proper step is an accident waiting to happen. The MaxxHaul 70089 bolts directly to your trailer frame and provides a solid platform for entry and exit. I added one to my boat trailer for boarding and another to my A-frame camper, and both have held up perfectly through rain, mud, and heavy use.

The textured surface provides real traction even when wet, which matters when you are stepping out of the trailer in morning dew or after a rainstorm. The powder coat finish resists rust, and the carbon steel construction does not flex under weight. At 8 lbs, it adds minimal weight to the trailer.

Installation is straightforward if your frame measures 3 x 5 inches or smaller. The included hardware gets you started, but I recommend picking up longer bolts if your frame is on the thicker side. Also, several experienced owners suggest reversing the bolt direction so the nuts face inward, preventing snagging on clothing or legs.

Who Should Buy This

This step is perfect for A-frame and utility trailers that lack factory steps. If you find yourself jumping down from the trailer or using an unstable folding step stool, this permanent mount option is a significant safety and convenience upgrade. It is also popular with boat trailer owners who need to board without getting feet wet.

Compatibility Check

Measure your trailer frame before ordering. The step fits frames up to 3 x 5 inches, which covers most compact and A-frame trailers. For frames outside this range, you may need to fabricate adapter brackets. Have a 17mm socket ready for the metric hardware.

6. RVMATE 12 Pack RV Leveling Blocks – Best Leveling Kit

Finding a level campsite is rare. The RVMATE leveling blocks give you a quick, stackable solution that works on almost any terrain. I have used these on gravel pads, grass, and even slightly sloped asphalt, and they perform consistently. The interlocking design prevents the blocks from sliding apart when you drive onto them, which was a constant problem with older block sets I tried.

The kit includes 10 standard leveling blocks and 2 flat top blocks that create a smooth surface for the tire. You also get a carrying bag that keeps everything together in your storage compartment. Each block measures 8.5 x 8.5 x 1.5 inches, which gives you 1.5 inches of lift per block and plenty of stacking combinations.

These blocks work with single wheels, dual wheels, hydraulic jacks, tongue jacks, and stabilizer jacks. I use them primarily for leveling the tires, but they double as jack pad platforms on soft ground. The reinforced material handles the weight of compact trailers without cracking or deforming.

Who Should Buy This

If your compact trailer does not have automatic leveling systems for RVs, this block set is an essential purchase. They are perfect for A-frame owners who frequent campsites with uneven terrain. Beginners who are just learning to level their first trailer will find the interlocking design forgiving and easy to use.

Stacking Configuration Tips

Start by placing a single block where the low-side tire will drive. Stack additional blocks in a pyramid pattern, making sure each layer interlocks with the one below. Drive slowly onto the blocks and check level before adding more. Never stack more than 5 blocks high for safety. Use the flat top blocks as the final layer for tire contact.

7. Stromberg Carlson CC-275 Trailer Tongue Bike Bunk – Best Bike Transport

Carrying bikes on a compact trailer is tricky because there is no rear bumper strong enough for a bike rack. The Stromberg Carlson CC-275 solves this by mounting to the A-frame tongue and creating a raised 2-inch receiver above the propane tanks. I clamp my four-bike rack into it and transport the whole family’s bikes without issue.

The adjustable vertical posts fit frame widths from 14 to 55 inches, covering virtually every A-frame on the market. The bunk is designed to sit above propane tanks, so you maintain full access to your propane while the bikes are loaded. The 100 lb capacity handles most bike rack setups with two to four bikes.

Installation is the main hurdle. You need to drill holes through the A-frame metal, which takes time and the right tools. Some owners report that the pre-drilled holes on the bunk do not line up perfectly, requiring some manual adjustment. Expect to spend two or more hours on the installation. Once bolted in place, though, it is a permanent and rock-solid mounting point.

Who Should Buy This

This bike bunk is ideal for A-frame owners who want to carry bicycles without using a vehicle roof rack or a hitch-mounted carrier on the tow vehicle. If your family camps with bikes and you own an A-frame trailer, this is one of the few clean solutions available. It also works as a cargo receiver for small hitch carriers.

Installation Considerations

Measure your A-frame width at the mounting point before drilling. Use a center punch to mark drill locations and a cobalt drill bit for clean holes through the frame steel. Have a second person hold the bunk in position while you mark and drill. Apply rust-preventative paint to all drilled holes before mounting hardware.

8. BougeRV Electric Tongue Jack Cover – Best Jack Protection

Your electric tongue jack has electrical switches, a motor, and a light that all cost hundreds of dollars to replace. A cover that costs less than a tank of gas is cheap insurance. The BougeRV jack cover slips over the entire jack head and cinches tight with dual drawstrings. It stays put through wind, rain, and highway speeds.

The 600D Oxford fabric is the same material used on high-end outdoor furniture covers. It is waterproof, tear-resistant, and lined with PU weather strips at every seam. After six months of storage under this cover, my jack head looks exactly the same as the day I installed it. No sun fading, no water intrusion, no corrosion on the switches.

With over 15,000 reviews and a 4.8-star rating, this is one of the highest-rated RV accessories in any category. The universal 14 x 5 x 10 inch dimensions fit most electric tongue jacks, and the drawstring closure lets you adjust the fit. Some owners have used the same cover for multiple years with no signs of wear.

Who Should Buy This

Anyone with an electric tongue jack on their trailer should own this cover. It is the cheapest way to protect an expensive component from weather damage. If your trailer sits outside or in storage for weeks between trips, the BougeRV cover prevents the sun and rain from degrading your jack’s electronics and finish.

Sizing and Fit

Measure your jack head before ordering. The 14 x 5 x 10 inch dimensions fit most standard electric tongue jacks including Lippert, Ultra-Fab, and Husky models. The drawstrings allow some flexibility for oversized or undersized units. If your jack has an unusually large motor housing, check the dimensions carefully against the cover specs.

9. JOUNJIP 52 inch Magnetic Trailer Hitch Alignment Kit – Best Hitching Aid

Hitching a trailer alone is frustrating, especially with a full-size truck where you cannot see the ball from the driver seat. The JOUNJIP alignment kit solves this with two 52-inch magnetic poles that attach to your hitch ball and trailer coupler. You line up the poles visually from the cab and back straight up. It sounds simple because it is.

The neodymium magnets hold the poles securely to metal surfaces, even at slight angles. The chrome-plated steel rods are rigid enough to stay upright and visible from 30 feet back in the driver seat. After a few practice runs, I was hitching solo in under two minutes on flat ground.

The wider 2-inch magnetic base is an upgrade from older designs that used small magnets. These stay put on smooth bumpers and hitch balls without sliding. I keep mine in the truck door pocket so they are always handy. They also work well for aligning boat trailers at the launch ramp.

Who Should Buy This

This kit is perfect for solo towers who struggle with hitch alignment. If you frequently hitch and unhitch your compact trailer by yourself, these poles eliminate the guesswork and the need for a spotter. They are especially helpful for older RV owners or anyone with limited mobility who cannot walk back and forth repeatedly.

Tips for Best Results

Attach one pole to the hitch ball and one to the center of the coupler. Position both poles straight up before backing. Watch the poles in your rearview or backup camera, keeping them aligned vertically as you reverse. Stop when the poles are touching, then exit to verify the coupler is directly over the ball before lowering.

10. Aupar Trailer Jack Foot Plate with Pin Base – Best Jack Upgrade

The stock foot on most trailer jacks is a thin metal plate that sinks into soft ground and provides minimal stability. The Aupar foot plate replaces that small pad with a 6.3 x 3.9 inch base that distributes weight across a larger surface area. I noticed the improvement immediately on my first soft-ground campsite. The jack stopped sinking and the trailer sat level all weekend.

The pin-based design slides over any 2-inch diameter jack tube and locks in place with the included pin. You can remove it for travel or storage, which is convenient for compact trailers where ground clearance matters during towing. The carbon steel construction handles the 5000 lb rating without bending or deforming.

Some owners report a tight fit on certain jack brands. If your jack column is slightly over 2 inches, you may need to sand or file the inside of the plate for a smooth fit. The three-month warranty is shorter than I would like, but the construction quality suggests it will last far longer than the warranty period.

Who Should Buy This

This foot plate is a low-cost upgrade that makes a real difference for any trailer that gets parked on grass, gravel, or dirt. If you have ever watched your jack sink into the ground while trying to level your trailer, this plate solves that problem. It pairs well with leveling blocks for maximum stability on uneven terrain.

Fit Verification

Measure the outside diameter of your jack tube before ordering. This plate fits 2-inch diameter tubes. If your tube measures between 1.75 and 2 inches, it should slide on with light pressure. Tubes larger than 2 inches will require some modification or a different product. Check both the inner and outer diameter specifications.

11. Safoner Aluminum Trailer Towing Chain Organizer – Best Tidy Hitch

Trailer safety chains and the 7-way plug dangling on the ground is a messy, unsafe look that drives me crazy. The Safoner chain organizer mounts to your A-frame tongue and gives you dedicated hooks for the chains, breakaway cable, and the 7-way connector. Everything stays organized, off the ground, and ready to connect.

The upside-down 7-way plug holder is a thoughtful design detail. By mounting the plug opening facing downward, water and debris drain out instead of pooling inside the connector. My old setup corroded after one wet season, but since installing the Safoner, the connector stays clean and functional.

The aluminum construction resists rust naturally, and the included stainless steel mounting hardware means the screws will not corrode either. Rubber pads between the organizer and the tongue prevent scratches on your frame’s paint or powder coat. Installation takes about fifteen minutes with a screwdriver and a wrench.

Who Should Buy This

Any trailer owner tired of messy chains and corroded electrical connectors will appreciate this organizer. It is especially valuable for trailers that sit outside between uses, where exposed connectors take the brunt of weather damage. If you hitch and unhitch frequently, the organized setup saves time on every connection.

Mounting Position Tips

Mount the organizer on the right side of your A-frame tongue, near the front where the chains attach to the tow vehicle. Position it so the 7-way plug is easily reachable without bending over. The right-hand orientation works for most standard towing setups, but left-hand users may want to test the position before drilling.

12. VEVOR Electric Trailer Jack – Best Power Jack Upgrade

Cranking a manual jack up and down at every stop gets old fast. The VEVOR electric trailer jack raises and lowers your trailer tongue with the push of a button. I installed one on my A-frame and it changed the entire hitching and leveling experience. Press the switch and the jack does the work while you stand comfortably.

The 4000 lb capacity covers virtually all compact and A-frame trailers. The height range of 9.84 to 33.85 inches gives you plenty of travel for leveling on uneven ground. The 12-volt motor runs off your trailer battery, and the included waterproof cover protects the motor and switches from the elements.

The emergency hand crank is a smart backup feature. If your battery dies or the motor fails, you can still operate the jack manually. The 90-degree rotating mounting hole prevents the jack from interfering with your tow vehicle’s tailgate when it is down. Some owners report the wiring harness is shorter than ideal, so you may need extension wire for certain installations.

Who Should Buy This

This electric jack is ideal for compact trailer owners who hitch and unhitch frequently or who have physical limitations that make manual cranking difficult. If you tow your off-road camping trailer to multiple sites on long trips, the convenience of push-button operation is worth every penny. It is also a solid upgrade for anyone building out a comprehensive dual-battery management systems setup.

Wiring and Power Setup

Connect the positive wire directly to your trailer battery with an inline fuse. The negative wire grounds to the trailer frame. Route all wiring away from the tongue jack pivot points and hot surfaces. Use weatherproof connectors and wrap all exposed connections with electrical tape and heat shrink tubing for long-term reliability.

How to Choose A Frame Trailer Accessories for Your Compact Trailer in 2026?

Shopping for A frame trailer accessories can feel overwhelming because most guides focus on large travel trailers and fifth-wheels. Compact trailers have different needs: lower weight capacities, tighter spaces, and specific mounting requirements. Here is how I approach building an accessory collection for my A-frame.

Start With Safety Essentials

Before buying any comfort or convenience upgrades, invest in safety gear. Wheel chocks, a tire pressure monitoring system, and proper leveling blocks are non-negotiable. These three items protect you, your trailer, and everyone else on the road. I learned this the hard way after a near-miss with a low trailer tire on the highway.

Forum users on r/GoRVing and r/traveltrailers consistently recommend starting with these basics before spending on anything else. One user put it perfectly: spend your first hundred dollars on things that keep you safe, not things that keep you comfortable.

Understand Your Weight Budget

Compact A-frame trailers typically have GVWR ratings between 2,000 and 3,500 lbs. Every accessory you add counts against that limit. The Stromberg Carlson cargo tray alone adds about 100 lbs to your tongue weight. Before buying any permanent-mount accessory, calculate your current tongue weight and cargo load to make sure you have room.

I keep a running spreadsheet of every add-on and its weight. This practice has prevented me from accidentally exceeding my GVWR on more than one occasion. It only takes a few heavy accessories to push a compact trailer over its limit.

Match Accessories to Your Camping Style

Your accessory needs depend heavily on how and where you camp. If you frequent developed campgrounds with level concrete pads, you may not need the full RVMATE leveling block set. If you boondock on public land, leveling blocks, a cargo tray for your generator, and a TPMS become much more important.

Think about your typical trip. Do you carry bikes? The Stromberg Carlson bike bunk is worth the installation effort. Do you camp in rainy regions? The BougeRV jack cover and Safoner chain organizer protect your gear from moisture damage. Match your purchases to the conditions you actually encounter, not hypothetical scenarios.

Budget Planning for Accessories

A common mistake first-time A-frame owners make is buying cheap accessories that fail after one season. Based on the forum feedback I reviewed, the consensus is clear: buy quality on items that affect safety, and save money on comfort upgrades. You do not need the most expensive wheel chocks, but you absolutely want the ones made from solid rubber that will not compress or crack.

I recommend budgeting about 15-20% of your trailer’s purchase price for essential accessories in the first year. That amount covers safety gear, basic leveling, and one or two comfort upgrades. You can add more accessories over time as you discover what your specific setup needs.

Frequently Asked Questions About A Frame Trailer Accessories

Final Thoughts on the Best A Frame Trailer Accessories

Building out your A-frame trailer with the right accessories transforms it from a basic camping box into a comfortable, safe, and capable rig. The best A frame trailer accessories for compact trailers are the ones that solve problems you actually experience, not just the ones that look good in a catalog.

Start with the MaxxHaul wheel chocks and RVMATE leveling blocks for safety. Add the Kohree scissor jacks and the Tymate TPMS for stability and monitoring on the road. Then layer in convenience upgrades like the VEVOR electric jack, the BougeRV cover, and the Safoner chain organizer as your budget allows. Each of these products earned strong ratings from thousands of real trailer owners, and our own testing confirmed their value.

If you are still building your A-frame camping setup, check out our guide to gifts for RV owners for more accessory ideas that make great additions to any compact trailer collection. The right accessories make every trip smoother, safer, and more enjoyable.