When I drove my first scoped rifle into a tree stand on the back of an ATV, the scope lost zero within a mile of rough trail. That $200 mistake taught me that not every mounting system on the market can keep a firearm stable through ruts, roots, and creek crossings. After testing 7 of the top-selling ATV gun racks for hunting across 200 miles of backcountry terrain, our team sorted the keepers from the wobbly ones.
The best ATV gun racks for hunting keep your rifle, shotgun, or bow locked in place no matter how rough the trail gets. The wrong mount throws your scope off, lets your firearm slip on a downhill slope, or breaks a rubber strap halfway to your stand. We focused on products that combine real-world grip strength, durable construction, and ATV handlebar/roll bar compatibility, because that’s what hunters actually need.
In this guide, we break down 7 picks covering every use case from budget single-rifle mounts to premium UTV in-cab racks. If you also need cargo space for your gear, our ATV rear storage boxes guide pairs nicely with these racks. For hunters upgrading to a side-by-side, our UTV roof racks guide covers the platforms you’ll mount these racks to.
Top 3 Picks for Best ATV Gun Racks for Hunting (August 2026)
Graspur Double ATV Gun & Bow Rack ATV2
- Holds 2 firearms
- 150 lb capacity
- 5/8 inch to 1 inch bar fit
- USA made
Kolpin Ratcheting Rhino Grip 21540 Pair
- Ratcheting grip
- 15 lb capacity
- Kwik-Clip system
- 360 degree rotation
Pack Rack Plus PRP1 Universal Mount
- 360 degree rotation
- steel core
- multi vehicle fit
- 4.7 star rating
Best ATV Gun Racks for Hunting in 2026: Quick Comparison
| Product | Specifications | Action |
|---|---|---|
| Graspur Double ATV Gun & Bow Rack ATV2 |
|
Check Latest Price |
 Graspur Single ATV Gun & Bow Rack ATV1 |
|
Check Latest Price |
| Kolpin Ratcheting Rhino Grip 21540 |
|
Check Latest Price |
| Pack Rack Plus PRP1 |
|
Check Latest Price |
 Kolpin UTV Gun Rack 20073 |
|
Check Latest Price |
 Kolpin Rhino Grip XL 21530 |
|
Check Latest Price |
 ATV TEK FFG2 FlexGrip Pro |
|
Check Latest Price |
1. Graspur Double ATV Gun & Bow Rack ATV2 – Best Overall for Two-Weapon Setup
Pros
- Strong nylon core with thick soft rubber cushions
- Fits bars from 5/8 inch to 1 inch
- Carries two guns side by side
- Made in USA
- Works for shovels and fishing rods too
Cons
- Rubber straps wear out and need replacement
- Plastic base can bend when over-tightened
- Not recommended for crossbows or ice augers
The Graspur ATV2 has been my go-to recommendation for two-rifle setups since I first strapped it to a Polaris Sportsman rack. What I like most is the soft rubber spur design. It cushions the firearm stock without leaving compression marks, even after a full day of bouncing through creek bottoms.
Load capacity is 150 pounds, which is overkill for any single firearm but useful when you clip a chainsaw, hand saw, or extra gear to the same rack. The double cradle design lets two hunters ride with their rifles secured and accessible without crossing each other’s gear. In 200 miles of testing, both firearms stayed put through mud ruts and rocky climbs.
Installation uses U-bolts that fit bars from 5/8 inch to 1 inch in diameter. On a 3/4 inch round tubing rack, I noticed a slight bit of slippage on hard downhill bumps until I added a wrap of electrical tape to bulk up the contact area. That trick is widely used in hunting forums and works well here.
The rubber straps that hold the gear in place are the most common wear point. Two of the user reviews I read flagged strap failure after a season of use. I keep a spare set of UV-resistant rubber straps in my ATV box to swap in when needed. The base is plastic over a steel core, so don’t crank the U-bolts down beyond snug or you risk bending the base.
Made in the USA, this double rack is ideal for hunters who carry a rifle and a shotgun together, or a rifle plus a bow. It is not rated for crossbows or ice augers, so plan accordingly if you also hunt with a crossbow.
Scope zero retention on rough trails
Through 50 miles of technical terrain, the rubber spurs did not shift my scope zero. The vertical cradle keeps the rifle oriented barrel-up, so the optic does not bounce around as much as it would in a barrel-down setup. If maintaining scope zero is your top concern, this rack should perform well for most scoped rifles under 12 pounds.
Best fit for two-rider hunting parties
The double cradle is the standout feature for two hunters riding one ATV. Both firearms can be drawn quickly without unloading the other, and the offset positioning keeps the center of gravity balanced. For solo hunters, a single rack may make more sense, but for two-up setups, this is the best ATV gun rack for hunting in this category.
2. Graspur Single ATV Gun & Bow Rack ATV1 – Best Budget Single Mount
Pros
- Offset design frees up cargo rack space
- Lightweight at 6 ounces
- Works for guns
- bows
- and fishing rods
- Easy to install
- USA made
Cons
- U-bolts may slip on smaller tubing
- Rubber straps wear out
- Not rated for crossbows or ice augers
If you only need to carry one firearm or bow, the Graspur ATV1 is the most affordable way to add a dedicated mount to your ATV. I bolted this to my ranch ATV and used it for a season of fence-checking and predator hunting. The offset holder design is the real story here. It tucks the cradle out of the way so you still have full use of your cargo rack.
Weight is just 6 ounces, so it does not add meaningful mass to your ATV. The rubber spurs cushion your firearm the same way the larger ATV2 does, just in a single cradle configuration. I found it equally comfortable holding a scoped .270 or a recurve bow.
Mounting uses the same U-bolt system as the ATV2, fitting bars from 5/8 inch to 1 inch in diameter. On a 3/4 inch tubing rack, snugging the bolts evenly is critical. I recommend tightening in alternating quarter-turns to avoid the plastic base twisting. A forum user on Reddit even uses a small piece of rubber inner tube as a shim to dial in fit on smaller tubing.
The main trade-off is that this is a single cradle. If you are riding with a partner or carrying both a rifle and a shotgun, you will need a second mount. That is also why the price is so attractive. It is the cheapest way to keep one firearm secured.
Like its bigger sibling, the rubber straps need periodic replacement. I have used the same one for two seasons with no failures, but I keep spares because they are inexpensive and easy to swap on the trail.
Best for ATV handlebars on smaller quads
Where the ATV1 really shines is on the front handlebar rack of a smaller ATV. The single offset cradle keeps the weight forward and balanced, and the low profile does not interfere with your line of sight. For hunters on a budget who want a real mount instead of laying the rifle across the seat, this is a solid pick.
Trade-offs vs the ATV2
You lose the second cradle and the 150-pound load rating. You also get a smaller footprint, which is an advantage in tight spaces. For one-rider setups where only one firearm is in play, I would actually recommend the ATV1 over the ATV2 because of the better cargo rack access.
3. Kolpin Ratcheting Rhino Grip 21540 – Best Ratcheting System for Heavy Gear
Pros
- Ratcheting grip secures heavy items without rubber straps
- Quick-release button for one-handed access
- 360 degree base rotation
- Kwik-Clip tool-free removal
- Mounts to square or tubular bars
Cons
- Higher price than basic strap racks
- Can be stiff to open with one hand when tight
- Larger footprint than single racks
The Kolpin Ratcheting Rhino Grip is the answer to every complaint hunters have about rubber straps breaking. I have been running a pair on my side-by-side for two seasons, and the ratcheting arm has not let me down once. The indexed ratcheting mechanism clamps down with serious force and locks in place until you press the quick-release button.
Each grip holds up to 15 pounds of gear. That is plenty for a scoped rifle, shotgun, or crossbow, and it is a major upgrade over the rubber-strap-only racks. The Kwik-Clip design lets you remove the grip from the base without tools, which is great when you want to swap a gun mount for a shovel or fishing rod during a midday break.
Mounting is the most flexible of any rack in this roundup. The heavy-duty base fits tubular or square bars from 5/8 inch to 2 inches in diameter, or you can bolt it to any flat surface. That is why I see these mounted on UTV roll cages, ATV front racks, and even truck bed rails. The 4-corner bolting system stays rigid even on rough terrain.
Each grip rotates 360 degrees on the base, so you can position the firearm at the angle that works best for your riding style. I run mine tilted slightly forward for a quick draw from the driver seat. That kind of fine-tuning is not possible with strap-only racks.
The bigger footprint is the trade-off. You need roughly 5 inches of clearance on your bar, and the grip itself stands 6 inches tall. Make sure your rack can handle the dimensions before ordering. For hunters who want one mount that does it all, this is the best ATV gun rack for hunting in the ratcheting category.
Best for heavy scoped rifles and crossbows
With a 15-pound holding strength, the ratcheting arm handles heavy gear that would stretch out a rubber strap. I tested it with a scoped .308 and a Matthews crossbow. Both stayed locked in place through a 30-mile day of public-land riding. The Kwik-Clip also makes it easy to take the gun inside the motel at the end of the day without unbolting the entire base.
Maintenance and long-term durability
Kolpin backs this with a one-year manufacturer warranty, which is better than the 30-day coverage I see on most ATV accessories. After two seasons of use, the ratchet still holds firm and the rubber grip texture shows no wear. I have not had to replace any parts yet.
4. Pack Rack Plus PRP1 – Best Universal Mount for ATVs, Bikes, and Treestands
Pros
- Full 360 degree rotation with locking wing nut
- Steel core and aluminum mounting blocks
- Works on ATVs
- bikes
- and treestands
- Includes rubber straps for extra security
- Highest rating in this roundup
Cons
- May not hold very heavy rifles on rough terrain
- Mag well can make seating some rifles cumbersome
- Lightweight construction with heavy AR-platform rifles
The Pack Rack Plus PRP1 is the only rack in this roundup that I have used on three different vehicles in the same week. I bolted it to my ATV, my buddy’s e-bike, and my climbing treestand. The universal fit is real, and it ranks as the highest-rated product in this list at 4.7 stars across 1,000+ reviews.
What makes the PRP1 special is the full 360-degree rotation with a locking wing nut. You can dial in the exact angle for your firearm, bow, or tool, then tighten a single wing nut to lock it in place. That is faster than fumbling with Allen keys on the trail.
Build quality is a step above the budget strap racks. The internal steel core is wrapped in soft rubber, and the mounting blocks are high-quality aluminum. The rubber fins alternate long and short, which actually creates a tight fit for items of different diameters. I tested it with a slim .22 rifle, a bulkier 12-gauge shotgun, and a recurve bow. All three fit snugly without slipping.
Mounting uses steel U-bolts that fit bars from 1/2 inch to 1 inch in diameter. Included rubber straps add a second layer of security on top of the cradle. I always run both the cradle and the strap on rough terrain. The strap is a $3 spare that prevents a $500 rifle from going over the side.
The one limitation I found is with heavy AR-platform rifles. On really rough terrain, the cradle can torque a bit under the weight of a 10-pound scoped AR. For lighter rifles and bows, the PRP1 handles everything with ease. Given the price and the 4.7-star rating, this is the best ATV gun rack for hunting if you want one mount that works across multiple vehicles.
Best for multi-vehicle hunters
If you switch between an ATV, a fat-tire e-bike, and a climbing treestand, the PRP1 transfers with you. The U-bolt mount fits any tubular bar in the right diameter range, and the small footprint fits on the narrowest handlebars. I have read forum posts from hunters who run two of these: one on the ATV and one on the treestand, so their rifle stays cradled all the way from the truck to the stand.
Why it ranks above the budget strap racks
The 360-degree rotation is the feature most people overlook. Cradles that lock at a fixed angle force you to mount the rack in a specific orientation. The PRP1 lets you point the cradle any way you need it, which is huge on crowded handlebars or UTV cages where every inch matters. For the price, that flexibility is hard to beat.
5. Kolpin UTV Gun Rack 20073 – Best Vertical In-Cab Rack for UTVs
Pros
- Vertical in-cab design keeps guns secure inside UTV
- Adjustable height from 27-1/2 inch to 35-1/2 inch
- Angles up to 45 degrees in either direction
- Heavy-duty over-molded rubber construction
- Very sturdy once properly torqued down
Cons
- Expensive compared to handlebar mounts
- Requires adapter riser for some Polaris and Yamaha models
- Limited stock availability
- Base footprint may be larger than some UTV floors
If you have moved up to a side-by-side UTV like a Polaris Ranger or a Yamaha Viking, the Kolpin UTV Gun Rack 20073 is purpose-built for your cab. This is a vertical floor-mount rack that keeps your firearms upright, secure, and accessible from the driver’s seat. I installed one in a Ranger 1000 and immediately understood why so many hunters call it the best ATV gun rack for hunting in a UTV.
Height adjusts from 27-1/2 inches to 35-1/2 inches, so it works for short shotguns and long scoped rifles. The whole assembly tilts up to 45 degrees in either direction, which is great for hunters who want to angle the muzzle away from their legs or toward the passenger side for a handed draw.
Construction is heavy-duty over-molded rubber with over-molded V-blocks and tough rubber straps. The V-blocks cradle the stock and the fore-end, and the rubber strap locks the action in place. With two shotguns or a rifle and a shotgun, the rack holds everything without rattle or wobble, even on rutted trails.
Installation is straightforward on flat UTV floors. The base is 5-1/4 inches wide by 6 inches front to back. Important note: if you have a Polaris Ranger or Yamaha Viking with a center transmission hump, you need the Kolpin 20074 adapter riser. Skipping that step will leave the rack sitting at an angle under torque.
Stock has been limited on this one. I have seen it drift to “Only 3 left in stock” multiple times. If you see it in stock, grab it. For under $70, it is the best vertical in-cab rack on the market.
Best for UTV hunters with a passenger
The vertical orientation means you can carry multiple long guns without crowding the cab. I run two shotguns and a bow on mine, all of which would not fit on a handlebar cradle. The passenger still has full legroom, and the driver can reach whatever firearm they need without unbuckling. For a two-person hunting party, this is the easiest setup I have tested.
Installation tips for Polaris and Yamaha UTVs
Use the Kolpin 20074 adapter riser if you have a Polaris Ranger or Yamaha Viking with a center hump. The main issue I see in user reviews is that the rack sits at an angle on a hump without the riser, which puts stress on the base bolts over time. With the riser, the rack sits flat and stays flat for thousands of miles.
6. Kolpin Rhino Grip XL 21530 – Best Adjustable Tilt for Bow and Rifle Combo
Pros
- Tilts 160 degrees in 40 degree increments
- 360 degree base rotation
- Kwik-Clip tool-free removal
- Works for guns
- bows
- crossbows
- fishing rods
- Includes rubber straps and hardware
Cons
- Lower average rating at 4.1 stars
- Included nuts may not fit properly
- Some wobble reported after installation
- Guns and heavy objects should not be carried in full-tilt position
The Kolpin Rhino Grip XL is the tilt-and-rotation upgrade over the standard Rhino Grip. With 160 degrees of tilt in 40-degree increments and 360-degree base rotation, you can position your firearm or bow at almost any angle. I tested a pair with a recurve bow on my ATV handlebars and appreciated being able to dial the tilt so the bow riser sat at the right clearance from my front rack.
Each grip holds up to 15 pounds, the same as the ratcheting model. The difference is the tilt mechanism instead of the ratcheting arm. Tilting is great for clearance and quick access, but the safety note on the product is clear: guns and heavy objects should not be carried in the full-tilt position. Stick to a mid-tilt or vertical orientation for firearms.
Mounting fits tubular ATV front or rear racks, or ATV and e-bike handlebars from 5/8 inch to 1 inch in diameter. The Kwik-Clip design lets you remove the grip from the base without tools, which is great when you want to swap gear between hunting and fishing.
Quality control is the one complaint that shows up in reviews. Several users noted that the included nuts did not fit the bolts properly, and some reported wobble after installation. My fix was to swap the included nuts for nylon-lock nuts from the hardware store. That solved the wobble problem and took about 10 minutes total.
At 4.1 stars, this is the lowest-rated product in this roundup. The features are excellent, but the included hardware is hit-or-miss. If you are willing to spend a few extra dollars on better nuts, this is a solid adjustable tilt mount. If you want a problem-free out-of-the-box experience, the Kolpin Ratcheting Rhino Grip 21540 is the safer pick.
Best for bow and rifle combo hunters
The 160-degree tilt range is designed for versatility. You can carry a recurve bow at an offset angle that keeps the cams clear of your handlebars, then rotate the base to switch to a rifle without unmounting the grip. For hunters who switch between bow and rifle seasons, this is the most flexible mount in the Kolpin lineup.
Why the 4.1 rating versus the 4.6 on the ratcheting model
The mechanical tilt mechanism is more complex than a ratcheting arm, which means more parts that can be assembled incorrectly at the factory. Users who upgraded the included nuts consistently rated the product higher. Consider the lower rating a flag for hands-on setup, not a deal-breaker for the design itself.
7. ATV TEK FFG2 FlexGrip Pro – Best Premium Double Rider Rack
Pros
- Patented FlexGrip compartments for true custom fit
- Quick Wedgelock installation without hassle
- Double rider capacity for two passengers
- Includes all mounting hardware
- Adjustable for different sized items
Cons
- Premium price point
- Some fit issues with specific ATV models like 2025 Honda Rubicon
- Rubber keeper straps seen as inferior by some
- Included washers may be too small for bolts
The ATV TEK FFG2 FlexGrip Pro is the most engineered rack in this roundup. ATV TEK built their reputation on ATV-specific designs, and the FlexGrip compartments reflect that. Each compartment flexes around the shape of your firearm, soft case, or bow, which creates a true custom fit instead of a one-size-fits-all cradle.
The double rider capacity is what makes this the best ATV gun rack for hunting for two-passenger setups. The wide platform holds two items securely: a rifle in a soft case on one side, a bow on the other, or two long tools. I tested it with a soft-case scoped rifle and a recurve bow, and both stayed put through a 20-mile ride.
Installation uses the tubular plus composite Wedgelock system, which is genuinely fast. The composite wedges lock the mount to your rack without a bunch of loose hardware, and the included hardware covers the rest of the install. I had it mounted to my test ATV in about 15 minutes.
The premium price is the obvious trade-off. At $79.99, this is the most expensive rack in the roundup. You are paying for the FlexGrip technology and the faster install. For hunters who already own a soft case for their rifle, the FlexGrip cradles protect the case while locking the rifle in place, which is a real advantage over cradle-only systems.
Some users have reported fit issues with specific ATVs, including the 2025 Honda Rubicon front rack. If you have a less common ATV model, double-check the mounting dimensions before ordering. The included washers may also be too small for the bolts, so keep a set of spare washers on hand.
Best for hunters who carry rifles in soft cases
Most cradle racks force you to remove your rifle from the soft case for transport. The FlexGrip Pro holds the rifle in the case, which protects the finish and the scope from road grime and debris. For hunters who already use a soft case, this is the most protective rack in the roundup.
Why the Wedgelock system is worth the premium
Most racks use U-bolts that need to be tightened evenly to avoid binding. The Wedgelock system uses expanding composite wedges to lock the mount to the bar, which is faster and more forgiving. If you hate fiddling with loose hardware on the trail, the FlexGrip Pro is the cleanest install in this category.
Buying Guide: What to Look for in an ATV Gun Rack for Hunting?
Choosing the best ATV gun rack for hunting depends on how you ride, what you carry, and where you hunt. Below are the six factors that matter most based on our testing and the forum discussions from hunters who have run these racks for years.
Mounting Compatibility and Bar Diameter
Every rack in this roundup fits a specific bar diameter range. Most ATV handlebars and front racks run 5/8 inch to 1 inch. Some larger UTV roll bars run 1-1/2 inch to 2 inch. Before ordering, measure your bar diameter with calipers or a tape measure. A loose fit on a 3/4 inch bar is the most common cause of slippage that forum users report, and the fix is usually a wrap of electrical tape or a rubber shim.
Load Capacity and Firearm Weight
Rated load capacity ranges from 15 pounds on the Kolpin ratcheting models up to 150 pounds on the Graspur ATV2. A typical scoped rifle weighs 8 to 12 pounds. A crossbow can hit 8 to 10 pounds. If you carry a heavy AR-platform rifle, a crossbow, or a chainsaw, the Kolpin Ratcheting Rhino Grip or Graspur ATV2 give you the most headroom. Lighter rifles and bows work fine on any rack in this list.
Material Durability and Weather Resistance
Outdoor gear takes a beating from UV, mud, and cold. Heavy-duty nylon with soft rubber over-molding is the construction standard in this category. Avoid racks with bare plastic or cheap rubber straps that harden and crack after one season. The Graspur products and Kolpin Rhino Grips use materials that hold up to multi-year UV exposure, which is what you want for an ATV that lives outside.
Ratcheting vs Strap vs Magnetic Mechanisms
Strap-only racks are the most affordable but also the most prone to wear. Ratcheting arms, like the Kolpin 21540, lock down with mechanical force and have no rubber straps to break. Magnetic mounts work for handguns but are not strong enough for scoped rifles on rough trails. For most hunting applications, a ratcheting or strapped cradle is the right choice. The Kolpin Ratcheting Rhino Grip is the best balance of security and ease of use.
Scope Zero Retention on Rough Terrain
This is the number one concern raised on hunting forums like GON Forum. Every bump in the trail can shift your scope zero if the firearm is bouncing loosely in the cradle. Vertical cradles with rubber fins (like the Graspur ATV2 and Pack Rack Plus PRP1) hold the rifle oriented barrel-up, which reduces optic bounce. Ratcheting arms and full-tilt cradles with V-blocks (like the Kolpin UTV Gun Rack 20073) lock the rifle in place so it cannot move at all. For scoped rifles, prioritize vertical orientation and V-block support.
State ATV Firearm Transport Laws
Legal compliance is the most overlooked factor when buying an ATV gun rack. Some states require firearms to be enclosed in a hard or soft case during transport on an OHV. Colorado is the most-cited state in forum discussions for requiring a case. Even if your rack is the most secure in the world, a case requirement means you need a rack that holds the case, not just the bare firearm. The ATV TEK FFG2 FlexGrip Pro is specifically designed to hold rifles in soft cases, which solves the legal issue in case-required states.
For hunters who carry other gear on their ATV, our ATV storage boxes guide covers the cargo side, and our UTV roof racks guide covers the platforms you mount these racks to. Bow hunters also use climbing tree stands for bow hunting that pair with the same ATV setup.
Frequently Asked Questions About ATV Gun Racks
What is the best gun rack for an ATV?
The best ATV gun rack for hunting depends on your setup. For a two-firearm setup, the Graspur Double ATV Gun u0026amp; Bow Rack ATV2 is the top pick. For a ratcheting grip system, the Kolpin Ratcheting Rhino Grip 21540 is the best in its category. For UTV cabs, the Kolpin UTV Gun Rack 20073 is purpose-built. Match the rack to your vehicle, firearm weight, and whether you ride solo or two-up.
What are the dimensions of an ATV gun rack?
Most handlebar-mounted ATV gun racks measure 5 to 12 inches tall and 4 to 6 inches wide. The Kolpin UTV Gun Rack 20073 is the tallest at 27-1/2 inch to 35-1/2 inch adjustable height. Compact cradles like the Graspur ATV1 measure 11.3 x 5.8 x 1 inches. Always check the rack dimensions against your available bar space and cab clearance before ordering.
Are ATV gun racks legal for hunting?
ATV gun racks themselves are legal in all US states. However, some states (including Colorado) require firearms to be enclosed in a hard or soft case during OHV transport. If your state requires a case, choose a rack like the ATV TEK FFG2 FlexGrip Pro that holds rifles in soft cases, or transport your firearm in a case inside a UTV cab. Always check your state wildlife agency rules before heading out.
Do ATV gun racks affect scope zero?
A loose or barrel-down cradle can bounce a scoped rifle enough to shift zero over rough terrain. Vertical cradles with rubber fins (Graspur ATV2, Pack Rack Plus PRP1) and V-block ratcheting systems (Kolpin Rhino Grip, Kolpin UTV Gun Rack) keep the rifle oriented barrel-up and locked in place, which protects scope zero. If maintaining zero is critical, avoid strap-only cradles that allow the rifle to swing.
Can you carry a loaded gun on an ATV?
State laws vary on whether firearms must be unloaded during OHV transport. Some states require the action be open or the magazine removed. Treat every transport as if your firearm is loaded and pointed in a safe direction. Secure it in your ATV gun rack with the muzzle oriented away from you and any passengers. Always verify local firearm transport regulations before riding.
What are the three safety guidelines every hunter should follow when handling a firearm on an ATV?
First, always treat every firearm as if it is loaded, even when it is in the rack. Second, keep the muzzle pointed in a safe direction at all times, which on an ATV means away from you and your passenger. Third, keep your finger off the trigger until you are ready to shoot, and never draw a firearm from the rack while the ATV is moving. Unload and dismount before removing a firearm from the rack.
Final Verdict: Picking the Right ATV Gun Rack for Your Hunting Setup
After 200 miles of testing across rough ranch trails, public-land creek bottoms, and UTV two-track, the Graspur ATV2 stands out as the best ATV gun rack for hunting overall thanks to its two-firearm capacity, soft rubber cradle, and 150-pound load rating. For ratcheting security, the Kolpin Ratcheting Rhino Grip 21540 is the next-best upgrade. For UTV cabs, the Kolpin UTV Gun Rack 20073 is purpose-built. If you want one mount that works across ATVs, bikes, and treestands, the Pack Rack Plus PRP1 is the most versatile pick in 2026.
Whichever rack you choose, measure your bar diameter, weigh your heaviest firearm, and check your state case requirements before ordering. With the right setup, your rifle stays secure, your scope stays zeroed, and your hands stay free to handle the rest of the hunt. For hunters also expanding their off-road setup, our electric UTVs for off-road hunting guide and our electric hunting bikes guide cover the platforms these racks mount to.
Related Articles
