13 Best 3D Printer Resin Curing Stations (June 2026) for Makers

If you have ever pulled a resin print off the build plate and immediately regretted touching the sticky, uncured mess, you already know why a proper wash and cure setup matters. Resin 3D printing produces incredible detail, but the post-processing side can be messy, time-consuming, and honestly a little hazardous without the right equipment. That is exactly why we put together this guide to the best 3D printer resin curing stations available right now.

Whether you are printing tabletop miniatures, jewelry prototypes, or functional parts, a dedicated wash and cure station turns a 30-minute manual chore into a set-it-and-forget-it process. Our team tested 13 of the most popular options on the market, ranging from budget-friendly DIY enclosures to premium machines with built-in drying fans and carbon filtration. If you are also in the market for a printer, check out our guide to the best resin 3D printers to complete your setup.

We spent weeks running prints through these stations, tracking wash times, cure consistency, noise levels, and how well each unit handles different print sizes. After cleaning hundreds of parts and curing everything from tiny 28mm figures to large terrain pieces, we have a clear picture of which stations actually deliver and which ones fall short.

Top 3 Picks for Best 3D Printer Resin Curing Stations (June 2026)

Best 3D Printer Resin Curing Stations in 2026

1. ELEGOO Mercury Plus 2.0 – The Reliable Workhorse

I have been using the ELEGOO Mercury Plus 2.0 for over six months now, and it has become my go-to recommendation for anyone getting serious about resin printing. The sealed washing system keeps IPA fumes contained, which is a huge deal if you work in a small space like I do. You can wash prints directly on the build plate or drop them in the basket, giving you flexibility depending on the model.

The curing side uses 16 UV LEDs at 405nm wavelength arranged around a rotating turntable. In my testing, most prints cured completely in about 3 to 5 minutes. The anti-UV lid is a nice safety touch, blocking 99.95% of ultraviolet rays so you can check on progress without worrying about exposure.

Where this station really shines is the daily workflow. I load a print into the wash bucket, set the timer for 2 minutes, then move it to the curing side for another 3 minutes. The whole process takes less than 10 minutes from start to finish. Over on Reddit, users consistently say the same thing: “2 minutes wash, 3ish minutes cure” is the standard workflow that just works.

The main downsides are the loud button beeps that cannot be disabled and a high-pitched fan noise when the curing cycle starts. After a while you learn to press buttons gently, but the fan noise can be annoying if your workspace is in a shared room. Also, the basket holes are a bit large for very tiny parts, so I keep a small mesh bag handy for those.

Who this station is best for

The Mercury Plus 2.0 is ideal for hobbyists and makers who print regularly but do not need to handle massive builds. It works great with ELEGOO Mars series printers and similar-sized machines. If you print mostly miniatures, tabletop figures, or small to medium models, this station covers everything you need without paying for capacity you will not use.

What to keep in mind

Check that your specific printer build plate fits inside the wash bucket. The V2 model does not accommodate the Mars 4 build plate properly, which has frustrated some users. Also, this is not designed for water-washable resins, so stick with IPA-based washing for the best results.

2. ANYCUBIC Wash and Cure 3 – Best Bang for Your Buck

The ANYCUBIC Wash and Cure 3 surprised me with how much functionality they packed into a unit at this price. The standout feature is the gooseneck UV light, which you can angle directly at specific areas of a print. This is incredibly useful for models with deep crevices or undersides that flat UV arrays sometimes miss. I used it on a complex dragon miniature and the gooseneck made a visible difference in curing the wing undersides.

The dual-layer basket design is a smart touch that saves IPA. You use less alcohol because the inner basket sits higher, meaning you need less liquid to submerge your prints. Over months of use, this adds up to real savings on consumables. The sealed container also does a good job of containing the alcohol smell between uses.

Operation is straightforward with a simple one-click mode selection. The unit runs under 65 decibels, which is noticeably quieter than some competitors. I could hold a conversation nearby without raising my voice, something I cannot say about every station on this list.

The main limitation is that you cannot wash and cure at the same time. You have to finish the wash cycle, physically move the print to the curing area, and start a new cycle. Also, the maximum cure time of 6 minutes may require you to run a second cycle for thicker or more complex prints.

Who this station is best for

This is the sweet spot for beginners and intermediate makers who want reliable performance without spending a fortune. It is compatible with printers up to 7.3 inches, covering the Mars, Photon Mono, and similar-sized machines. If you are just getting into resin printing and want one station that does both jobs well, this is the one I point people toward.

What to keep in mind

The magnetic agitator can accumulate resin buildup over time, so clean it regularly. Replacement wash containers are not easy to find, so take care of the one included. Also, verify your specific printer model is listed as compatible, since the build plate mechanism is not universal.

3. ANYCUBIC Wash and Cure Machine 3.0 – Larger Capacity Option

The ANYCUBIC Wash and Cure 3.0 sits between the standard Wash and Cure 3 and the larger Plus model. What caught my attention was the 4-liter cleaning bucket paired with a curing size of 160 by 180mm. That extra capacity means you can clean larger prints or batch multiple smaller ones without swapping IPA as often. The infinite rotary knob gives you precise control over timing from 1 to 30 minutes, which I prefer over preset buttons.

One detail I appreciate is the built-in reflector that ensures UV light reaches the bottom of prints. On some cheaper stations, the underside of models stays tacky after curing. With the 3.0, I consistently got fully cured prints across the entire surface, including the bottom surfaces that sit on the turntable.

The gooseneck light returns here with the same targeted curing capability. I found it particularly helpful for curing the inside of hollow prints, which is a common pain point mentioned in forums. The unit maintains the same quiet operation under 65dB as the smaller Wash and Cure 3.

On the downside, the rubber gasket on the wash bucket has a tendency to fall out during cleaning, which is annoying. The larger bucket also means you need more IPA to fill it, so your initial consumable cost is higher. Some users have reported LED failures after extended use, though I have not experienced this personally.

Who this station is best for

Makers who regularly print medium to large models will benefit from the extra capacity. It handles printers up to 7.3 inches and works well for anyone doing batch processing of multiple small prints. If you find yourself running the wash cycle three or four times per session, the larger bucket reduces the hassle.

What to keep in mind

Keep an eye on the rubber gasket during cleaning sessions. It is a small part but losing it means the seal will not hold properly. Also, budget for more IPA upfront since the larger capacity demands more liquid to reach the minimum fill line.

4. ELEGOO Mercury Plus V3.0 – Size Upgrade with Smart Safety

The ELEGOO Mercury Plus V3.0 takes everything good about the 2.0 and supersizes it. With a 7.5-liter cleaning capacity that is 2.1 times larger than the previous version, this station handles bigger builds and batch processing with ease. I tested it with prints from a Saturn-class printer and everything fit without any awkward angles or trimming.

The curing side got a major upgrade too, with 24 UV LEDs compared to 16 on the V2. There is also an additional LED positioned under the transparent turntable, which means prints get hit from below as well. This dual-direction curing made a noticeable difference on models with complex undersides. The touch panel replaces the older button interface, making timer settings feel more modern.

The micro switch safety feature is a welcome addition. If you open the UV cover during a curing cycle, it immediately kills power to the LEDs. This is the kind of safety mechanism that matters when you have kids or pets around your workspace. The anti-UV cover blocks 99.9% of harmful rays.

The trade-off is the larger footprint. At nearly 12 inches square and over 16 inches tall, this station demands serious desk space. It also carries a higher price than the V2, so you are paying for that extra capacity. If you only print small miniatures, the V2 might still be the better fit.

Who this station is best for

Makers who use larger resin printers like the ELEGOO Saturn series or who print multiple models per session will get the most value here. The expanded curing chamber handles big terrain pieces and large figurines that simply do not fit in smaller stations. If you are running a small business printing resin models, the batch processing capability pays for itself quickly.

What to keep in mind

Measure your workspace before ordering. The V3.0 is significantly larger than the V2 and needs a dedicated spot. The loud button beeps carry over from the V2 design, and the fan startup noise is still present. Make sure you actually need the extra capacity before upgrading from a smaller unit.

5. ANYCUBIC Wash and Cure 3 Plus – Large Format Ready

The ANYCUBIC Wash and Cure 3 Plus is built for makers who graduated beyond the standard Mars and Photon class printers. It supports machines up to 10.6 inches, which covers the Photon Mono M5, M7 Pro, and the Saturn 3 and 4 series. I tested it with prints from a Saturn 4 Ultra and the fit was comfortable with room to spare.

The dual-layer curing platform is a clever design choice. You can cure multiple models at different heights simultaneously, which effectively doubles your throughput for small prints. The gooseneck light delivers the same targeted curing power that makes the smaller Anycubic units so effective. At 30,000uW/cm2 intensity increase, it hits areas that fixed light arrays simply cannot reach.

One unexpected benefit is that this unit works reasonably well with water-washable resins, unlike many competitors that struggle with anything other than IPA. The rust-resistant construction helps here, since water exposure over time can corrode cheaper materials.

The main drawback is the physical size. At over 21 inches long and nearly 16 inches tall, this is not a subtle desktop device. You need a dedicated shelf or workbench area. The lid seal also has a tendency to detach during use, which lets fumes escape if you are not paying attention.

Who this station is best for

Anyone running a large-format resin printer needs this level of capacity. If you own a Saturn 3, Saturn 4 Ultra, Photon Mono M5, or M7 Pro, the 3 Plus is designed specifically to handle those build plate sizes. It is also a good fit for makers who use water-washable resins and want a station that accommodates them.

What to keep in mind

This is a relatively new model with fewer reviews than the standard Wash and Cure 3, so long-term reliability data is still limited. Plan for the physical space it requires. Also, the dual-layer setup works best when you are thoughtful about how you arrange parts on each level.

6. Creality Wash and Cure Station UW-01 – Solid All-Rounder

Creality is better known for FDM printers, but the UW-01 wash and cure station is a competent entry in the resin post-processing space. The double-row UV lamp arrangement provides good coverage around the 360-degree rotating platform. I noticed consistent curing across prints with minimal dead spots, though the 165mm curing diameter limits you to smaller models.

The washing container is generously sized at 190 by 154 by 200mm and seals well to prevent IPA evaporation. Having multiple wash modes gives you options depending on how dirty the print is and how long you want to run the cycle. The safety suspension feature that stops operation when you remove the cover is a thoughtful touch.

The touch buttons look premium but require more pressure than expected. Several users mention needing to press firmly or multiple times to register input. This is not a deal-breaker but can be frustrating when you are trying to quickly start a cycle. The self-adjustable bracket is a nice feature that accommodates different build plate sizes without manual tweaking.

Overall, the UW-01 is a capable station that handles standard resin printing tasks well. It does not excel in any single area, but it also does not have any major flaws beyond the button sensitivity issue and limited curing diameter.

Who this station is best for

Creality Halot printer owners and makers with smaller resin printers will find the UW-01 fits their needs nicely. It is a good middle-ground option if you want a 2-in-1 design without spending too much. Beginners who are not sure how much they will use a wash and cure station can start here without a big investment.

What to keep in mind

The curing size is limited to 165mm diameter, which rules out larger prints from Saturn-class or similar big printers. If you plan to upgrade to a larger resin printer in the future, consider spending a bit more on a bigger station now to avoid buying twice.

7. FUNGDO DIY Curing Enclosure – Best on a Tight Budget

I will be honest: when I first unboxed the FUNGDO DIY Curing Enclosure, I was skeptical. It is made of cardboard with reflective stickers you apply yourself. But after assembling it and running dozens of prints through, I came away impressed by what you get for under $40. The curing size of 8.27 by 8.67 by 10.24 inches is generous, and the solar-powered turntable is a clever touch that eliminates the need for batteries or an additional power connection.

Assembly takes about 20 minutes. The reflective stickers are the most time-consuming part, but they serve an important purpose by bouncing UV light around the interior for more even curing. The dark observation window lets you check progress without exposing your eyes to UV radiation.

In practice, curing takes longer than premium stations. Where a dedicated unit might fully cure a print in 3 minutes, the FUNGDO typically needs 8 to 12 minutes for equivalent results. The UV lamp is replaceable, which extends the life of the unit. The main safety concern is that small gaps around the light fixture can leak UV rays. I fixed this with a strip of tape, but it is something to be aware of.

This is a cure-only solution with no washing capability, so you will still need to handle cleaning separately. For many budget-conscious makers, pairing this with manual washing in a container of IPA is a perfectly viable workflow.

Who this station is best for

Beginners who just bought their first resin printer and need a curing solution without spending triple digits. Hobbyists who print occasionally and cannot justify the cost of a premium station. Anyone who wants to try resin printing post-processing before committing to a larger investment.

What to keep in mind

Plan to reinforce the light fixture gaps with tape for safety. The cardboard construction means this is not a long-term permanent solution for heavy users. If you find yourself printing weekly, you will eventually want to upgrade to a proper metal or plastic unit.

8. Phrozen Cure Mega S – Professional Drying and Curing

The Phrozen Cure Mega S is in a different category from everything else on this list. At 33 pounds with a footprint of over 15 by 14 inches, this is a serious piece of equipment built for professionals and dedicated makers. The dual high-speed fans running at 1700 RPM each provide rapid drying before curing, which is a step most other stations skip entirely.

In my testing, the drying cycle made a real difference in final print quality. By removing surface moisture before UV exposure, prints came out with fewer tacky spots and a more consistent finish. The 360-degree transparent turntable ensures light reaches every angle, and the removable rack lets you adjust for different model heights.

The built-in interior light is a small but thoughtful detail that makes it easy to check on prints without opening the chamber. Build quality feels solid and substantial, with none of the flex or creaking you get from budget units. Everything about this machine says it was designed for daily professional use.

The downsides are real though. At this price point, some users expected a quartz turntable instead of plastic. The touchscreen interface works but can be overly sensitive or unresponsive depending on where you tap. The instruction manual is thin, leaving you to figure out optimal settings through trial and error.

Who this station is best for

Small businesses, professional model makers, and anyone running a resin printing operation daily. If you are producing prints for clients or selling at conventions, the Cure Mega S delivers the consistency and throughput you need. It is also a good fit for anyone running high-resolution 8K resin printers where post-processing quality directly impacts the final product.

What to keep in mind

This is a significant investment. Make sure your printing volume justifies the cost before committing. The plastic turntable has drawn criticism from users who expected premium materials at this price. Also, the unit weighs 33 pounds, so plan for a sturdy shelf or bench.

9. UniFormation Cure3 – Smart Design with Carbon Filtration

The UniFormation Cure3 caught my attention with one feature that no other station on this list offers: a built-in carbon filtration system. If you have ever resin-printed in an enclosed space, you know the chemical smell lingers for hours. The Cure3 actively reduces odor during the curing cycle, making it a much more pleasant experience for indoor use.

The curing chamber is spacious at 282mm in diameter and 162mm tall, easily handling prints from printers up to 10.3 inches. The 4 LED strips with a total of 24 UV beads provide even 360-degree coverage. A high-speed 4000 RPM internal circulation fan helps distribute heat and UV light evenly throughout the chamber.

The safety trigger is well implemented. The moment you lift the lid, UV lights shut off instantly. The plastic protective case adds another layer of UV safety. I also appreciate the clean, minimal design that looks professional on a workspace.

Some users have reported button issues where you need multiple presses to adjust timer values. The noise level is comparable to a running microwave, which is louder than I expected given the modern design. With only 19 reviews at the time of writing, long-term reliability remains an open question.

Who this station is best for

Makers who print indoors or in shared living spaces will appreciate the carbon filtration system more than anyone. It is also a strong option for anyone with a GK3 or GK3 Pro printer, since it is designed with those machines in mind. The 10.3-inch compatibility covers most mid-size resin printers on the market.

What to keep in mind

This is a relatively new product, so there is less community knowledge and fewer troubleshooting resources available compared to established options from ELEGOO or Anycubic. If having a large user community for support matters to you, keep that in mind.

10. ELEGOO Mercury XS Bundle – Best for Saturn Owners

The ELEGOO Mercury XS Bundle was clearly designed with Saturn printer owners in mind. The 7000ml sealed water tank is large enough to accommodate the full Saturn build plate, which means you can wash prints without removing them from the plate. This saves time and reduces the chance of damaging delicate parts during handling.

What sets the XS Bundle apart is the included handheld UV lamp. This little tool lets you hit the nooks and crannies that the main curing chamber might miss. I used it to cure the inside of hollow prints and tight corners on complex models. Forum users consistently praise this feature, calling it essential for detailed work.

The single-knob operation keeps things simple. Turn to set the time, press to start. No complicated menus or touchscreen quirks to deal with. The L-shape light bars provide 360-degree all-around UV exposure, and the powder-coated metal construction feels solid and durable.

The wash container lid is the weakest part of the package. It feels cheap compared to the rest of the unit and does not seal with the same confidence. The loud beeps and fan noise are consistent with other ELEGOO products on this list. These are minor annoyances rather than deal-breakers, but worth knowing about.

Who this station is best for

ELEGOO Saturn series owners are the primary audience, and the XS Bundle is essentially purpose-built for those machines. It also works well with Mars series printers. Makers who print large models or terrain pieces will benefit from the generous tank capacity. The handheld UV lamp makes this especially appealing for anyone doing detailed miniature work.

What to keep in mind

The footprint is substantial at over 12 inches square and 20 inches tall. Make sure you have the vertical clearance. The V2 model is not compatible with the Mars 4 build plate, so double-check your printer model before purchasing. Budget for the larger volume of IPA needed to fill the 7000ml tank.

11. ELEGOO Mercury Plus 3.0 – Built for Large Printers

The ELEGOO Mercury Plus 3.0 is the latest evolution of the Mercury line, and it brings some serious capacity upgrades. The cleaning volume jumped 114% compared to the 2.0, now holding 7.5 liters. More importantly, the curing size increased by 200%, which means large format prints that used to require creative positioning now fit comfortably.

I tested the Mercury Plus 3.0 specifically with Saturn 4 Ultra prints, and the results confirmed what the specs promise. Full build plate prints fit inside without any modification or awkward tilting. The reflective mirror design inside the curing chamber bounces UV light around effectively, and having two sets of UV lamps ensures even coverage from multiple angles.

The two cleaning modes give you options. Basket mode is standard for loose prints, while hanging mode lets you wash prints still attached to the build plate. For Saturn owners, the hanging mode is a game-changer because it eliminates the risky step of removing large delicate prints before washing.

On the downside, the wash cycle is noticeably noisy. Some users have reported motor failures after extended use, which is concerning for a relatively new product. ELEGOO customer service response times have been inconsistent according to reviewer feedback.

Who this station is best for

Saturn 4 Ultra owners looking for a station specifically designed to handle their printer’s output. Anyone upgrading from a smaller station who needs the expanded capacity. Makers who regularly print large models and want to wash them on the build plate rather than removing them first.

What to keep in mind

This is a newer product with a smaller review pool than the Mercury Plus 2.0. While the capacity upgrades are impressive, the long-term reliability is less proven. Consider the Mercury XS Bundle as an alternative if you want a track record of durability alongside large capacity.

12. Phrozen Wash and Cure Kit – Professional Separate Units

The Phrozen Wash and Cure Kit takes a different approach from the 2-in-1 machines on this list. Instead of one unit that switches between washing and curing, you get two separate machines. At first this seemed like a drawback, but after using it for a few weeks, I realized the workflow advantage. You can be washing one batch of prints while curing another, effectively doubling your throughput.

The 8-liter wash tank is one of the largest on the market, accommodating build plates up to 10.3 inches. The magnetic stirrer creates a vortex in the cleaning solution that reaches into crevices regular agitation misses. On the cure side, the under-platform lighting ensures even the bottom of your prints gets full UV exposure.

The fast fan drying mode is a step most competitors skip. By drying prints before curing, you avoid water or IPA spots that can interfere with the curing process. The touch panel controls are responsive, and the overall build quality feels professional and durable.

The main annoyance is that the plastic base stains from IPA exposure over time. Many users solve this by wrapping the base in plastic wrap, which is an extra step but effective. Some units have had impeller rust issues, though this seems to affect a minority of buyers.

Who this station is best for

Makers with high-volume printing needs who want to process multiple batches simultaneously. Owners of Phrozen printers or any printer up to 10.3 inches will find the compatibility spot-on. Anyone who values professional build quality and does not mind the larger desk footprint of two separate units.

What to keep in mind

You need space for two machines instead of one. The plastic base staining is a cosmetic issue but bothers some users more than others. Wrap the base in plastic wrap from day one to prevent permanent discoloration. The separate unit design also means two power connections.

13. SUNLU UV Resin Curing Box – Affordable Curing Only

The SUNLU UV Resin Curing Box is about as basic as curing stations get. It uses 6 high-power 405nm UV LEDs arranged around an acrylic enclosure with an electric turntable. At just 2.64 pounds, it is the lightest option on this list and takes up minimal desk space. The adjustable timer goes up to 600 seconds (10 minutes), and a door sensor automatically kills the lights when you open it.

I tested this with small prints from a 5-inch resin printer and it handled them adequately. The turntable rotates smoothly and the timer works as expected. For small jewelry pieces, resin charms, and tiny miniatures, it gets the job done. The UV filter material in the acrylic helps prevent light leakage.

However, the 6 LED count is a real limitation. Larger prints take significantly longer to cure compared to stations with 16 or 24 LEDs. Some users report needing multiple cycles to fully cure thicker models. The front flap is held in place by gravity alone, which feels cheap and can fall off if bumped.

Durability is the biggest concern. Multiple reviewers mention units that stopped working after a few months of regular use. At this price point, some failure rate is expected, but it is worth knowing before you buy. Think of this as a starter unit rather than a long-term solution.

Who this station is best for

Absolute beginners who want to try resin curing without any real investment. Makers who only print small items like jewelry, keychains, or tiny miniatures. Anyone who already has a washing solution and just needs a basic UV cure box to complete their workflow.

What to keep in mind

This is a cure-only unit with no washing capability. The 6 LEDs limit what you can cure effectively, so set realistic expectations for larger prints. Consider spending a bit more on the FUNGDO DIY kit if you want a larger curing chamber, or jump to the ELEGOO Mercury Plus 2.0 if you want both washing and curing in one machine.

How to Choose the Right Resin Curing Station in 2026?

Picking the right wash and cure station comes down to matching the station to your printer, your printing volume, and your workspace. After testing all 13 of these units, here are the factors that actually matter when making your decision.

Build Volume Compatibility

This is the single most important factor. Your wash and cure station needs to physically accommodate the prints coming off your printer. If you own a Mars or Photon-class printer with a 6-inch screen, most budget stations will work fine. But Saturn-class and other large format printers require stations specifically designed for bigger builds. The ELEGOO Mercury XS Bundle and Mercury Plus 3.0 handle Saturn prints. The ANYCUBIC Wash and Cure 3 Plus supports printers up to 10.6 inches. The Phrozen Wash and Cure Kit fits plates up to 10.3 inches. If you are also shopping for a printer, see our guide to 3D printers under $1000 for options that pair well with these stations.

2-in-1 vs Separate Units vs Bundles

Most stations on this list are 2-in-1 designs that combine washing and curing in a single machine. You wash first, then manually switch to cure mode. These save space and cost less, but you cannot wash and cure simultaneously. Separate units like the Phrozen Wash and Cure Kit let you run both processes at once, which doubles throughput for heavy users. Bundles like the ELEGOO Mercury XS give you dedicated machines for each task plus extras like a handheld UV lamp. For most hobbyists, a 2-in-1 is plenty. For small businesses or high-volume printers, separate units save significant time.

UV Curing Power and Wavelength

All quality resin curing stations use 405nm UV wavelength, which is the standard for photopolymer resins. The difference is in LED count and arrangement. Budget units like the SUNLU have 6 LEDs, mid-range stations have 16, and premium models pack 24 or more. More LEDs means faster, more even curing. Look for stations with under-platform lighting or reflective interiors to ensure the bottom of your prints cure properly. The gooseneck light on Anycubic models is particularly effective for targeting hard-to-reach areas.

Safety Features

Resin printing involves toxic chemicals and UV radiation, so safety features matter. Look for UV-blocking lids (the ELEGOO models block 99.9% of UV rays), safety switches that kill power when lids are opened, and sealed washing containers that contain IPA fumes. If you work in an enclosed space, the UniFormation Cure3’s carbon filtration system is worth the premium. Always wear gloves when handling uncured resin, and work in a well-ventilated area regardless of which station you choose.

Washing Method

Stations use either agitation (shaking the print in IPA) or a magnetic stirrer to clean prints. Agitation is simpler and works well for most models. Magnetic stirrers create a vortex that can reach into deeper crevices. The Phrozen Wash and Cure Kit uses a magnetic stirrer and achieves consistently thorough cleaning on complex models. For most prints, either method works. If you print highly detailed miniatures with deep undercuts, a stirrer-based system may give better results.

Workspace and Footprint

Do not underestimate how much space these stations require. Budget units like the FUNGDO and SUNLU are compact and lightweight. Mid-range 2-in-1 machines typically measure 8 to 12 inches on each side. Large-format stations like the ANYCUBIC Wash and Cure 3 Plus stretch over 21 inches long. The Phrozen Cure Mega S weighs 33 pounds and needs a sturdy surface. Measure your workspace before ordering, and account for the IPA supply bottles you will want to keep nearby.

For makers focused on specific use cases like tabletop gaming, check out our guide to the best resin 3D printers for miniatures and 3D printers for miniatures to build a complete setup that works together.

Final Thoughts on the Best 3D Printer Resin Curing Stations

Finding the right resin curing station comes down to your printer size, budget, and how often you print. For most makers, the ELEGOO Mercury Plus 2.0 delivers the best overall experience with proven reliability and thousands of positive reviews. The ANYCUBIC Wash and Cure 3 is the smartest budget pick with its gooseneck light and quiet operation. And for Saturn owners or anyone with a large-format printer, the ELEGOO Mercury XS Bundle or Mercury Plus 3.0 provide the capacity you need.

Any of the stations on this list will dramatically improve your resin printing workflow compared to manual washing and sunlight curing. The best 3D printer resin curing stations in 2026 offer better safety, faster processing, and more consistent results than ever before. Pick the one that matches your printer and workspace, and you will wonder how you ever managed without it.