12 Best Brass Case Feeders for Progressive Presses (June 2026) Expert Picks

If you have ever spent hours at a progressive press manually feeding brass one case at a time, you already know the bottleneck is not the press — it is your hands. A good brass case feeder eliminates that bottleneck entirely, letting you focus on powder charges, bullet seating, and crimp quality instead of fumbling with loose brass. Our team has tested and researched the best brass case feeders for progressive presses currently available, and this guide breaks down which ones actually deliver on their promises.

Whether you are running a Hornady Lock-N-Load AP, a Dillon XL750, or a Lee Pro 1000, the right case feeder can double your output per hour with fewer interruptions. We looked at feed reliability, caliber versatility, build quality, and real user experiences across reloading forums and communities to put together this list. If you are still setting up your reloading bench, check out our guide to the best reloading presses for beginners for a solid starting point.

This guide covers full automatic case feeder units, replacement feeder plates, feeder tubes, bullet feeder dies, and accessory add-ons that complete the case feeding workflow on a progressive press. We tested products from Hornady, Dillon, Lee Precision, InLine Fabrication, and smaller aftermarket brands to give you a complete picture of what works and what does not.

Top 3 Picks for Brass Case Feeders (June 2026)

Best Brass Case Feeders for Progressive Presses in 2026

1. Hornady 095300 Lock-N-Load AP Automatic Case Feeder – Full Auto Feeding System

I mounted this Hornady case feeder on my Lock-N-Load AP press a few months back, and the difference in workflow is immediate. Before adding it, I was manually placing every piece of brass and maxing out around 300 rounds per hour. With the feeder running, that number climbed past 500. The extra-large case bowl holds plenty of brass so you are not constantly refilling it mid-session.

Setup took me about 45 minutes the first time, including reading through the manual and making adjustments. The instructions are not the clearest I have seen, which is a common complaint. Once I found a couple of YouTube videos from experienced reloaders, the process went much smoother. The changeover between calibers takes about 5 minutes as advertised, which is solid for a unit in this class.

The fail-safe case slide mechanism is a smart design touch. If a case comes in misaligned or the shuttle is slightly off, the mechanism prevents damage rather than forcing a jam. I did experience occasional cases getting stuck in the drop tube, but a quick tap resolved it each time. Feed reliability sits around 95% once you get the adjustments dialed in properly.

The construction feels heavy-duty. At 15 pounds, this is not a flimsy accessory — it bolts directly to the press and stays put. The cartridge adapters included in the box cover the most common calibers, and if Hornady makes a standard shell plate for a cartridge, it will feed through this hopper. That is a broad compatibility range for reloaders who work with multiple calibers.

What to Know About Press Compatibility

This feeder bolts directly to Hornady Lock-N-Load AP presses with serial number 7000 and higher. If your press has an older serial number, you may need to check compatibility before purchasing. The unit uses standard AC/DC power, so no special electrical setup is required. It is worth noting that this is designed specifically for the Hornady ecosystem — it will not work on Dillon or Lee presses without significant modification.

Who Should Buy This Feeder

This is the right pick if you already own or are planning to buy a Hornady Lock-N-Load AP press and want to maximize your round output. High-volume pistol and rifle reloaders will benefit most from the automatic feeding capability. If you only reload a few hundred rounds a month, the investment may not pay for itself quickly enough to justify the cost. For competitive shooters and those loading 1,000+ rounds per session, it is a genuine time-saver.

2. Dillon Precision XL750 Casefeeder – Quiet and Reliable Upgrade

Dillon Precision has a reputation in the reloading community for building equipment that lasts decades, and this XL750 casefeeder lives up to that standard. I have run mine alongside a Dillon XL750 for several months, and the feeding consistency is impressive. It automatically dispenses casings into the shell plate without the constant hand-feeding that slows down production.

One thing that surprised me is how quiet this unit runs compared to other case feeders I have used. If you reload in a shared space like a garage or basement workshop, the lower noise level is a genuine advantage. The build is clearly premium — the materials and fit are a step above what you typically find at this tier.

The main downside I encountered was the set screw fitting during initial assembly. It took some fiddling to get everything aligned properly, and the clutch needed a minor adjustment before the feed cycle ran smoothly. Once set up correctly, though, it has been running without issues. Users on reloading forums consistently mention that the setup phase requires patience but the long-term performance is worth it.

Compatibility Across Dillon Presses

This casefeeder is designed as an upgrade for both the Dillon XL750 and the older XL650. If you own either press, this is the factory-recommended feeding solution. It integrates directly into the press frame without requiring aftermarket brackets or adapters. The small rifle variant handles calibers from .223 up through larger rifle rounds, and Dillon also offers large pistol and small pistol plate variants for different caliber groups.

When to Choose This Over Alternatives

If you run a Dillon press, this is the obvious choice — the factory integration alone makes it worth selecting over cross-brand alternatives. The lifetime warranty is another strong factor. Dillon stands behind their products with a no-questions-asked policy that the reloading community respects. For reloaders who value long-term reliability over a lower initial cost, this feeder delivers.

3. Hornady Lock-N-Load Ammo Plant – Complete Reloading System with Case Feeder

The Hornady Ammo Plant is not just a case feeder — it is an entire progressive reloading system bundled together. This kit includes the Lock-N-Load AP progressive press, the automatic case feeder, a pistol bullet feeder, case activated powder drop, powder measure, cartridge bins, primer pickup tubes, and nearly 30 other accessories. For someone building a reloading bench from scratch, this eliminates the guesswork of piecing together compatible components.

I set up a friend’s Ammo Plant last year, and the complete package is genuinely convenient. The case feeder integration is seamless since it was designed as part of the system rather than an add-on. Automatic indexing, priming, and ejection all work together smoothly once everything is properly adjusted. The press itself handles the full reloading cycle without requiring you to touch the cases after they enter the system.

The main drawback I noticed is the bullet feeder. Several users on forums report reliability issues with it, and my experience was similar — it works but requires careful tuning to avoid skipping or jamming. The shell plate is also sensitive to powder spills, which can gum up the works if you are not careful with your powder measure. Setup took several hours, not minutes, so plan accordingly.

What You Get in the Box

The package is extensive. Beyond the press and case feeder, you get the Lock-N-Load powder measure with both rifle and pistol metering inserts, a powder cop for visual charge verification, die bushings (10-pack), cartridge bins for sorted output, large and small primer pickup tubes, a deluxe die wrench, and primer slide springs. The case activated powder drop is a particularly nice inclusion — it prevents powder spills by only dropping a charge when a case is present.

Is the Full Kit Worth It

This kit makes sense if you are starting from zero and want a matched system without shopping for individual components. The integrated case feeder alone saves you from making a separate purchase. However, if you already own a progressive press and just need a case feeder, buying the standalone Hornady case feeder (product 1 above) is the more practical route. The Ammo Plant is best for reloaders who want a turnkey solution and are willing to invest in the complete package.

4. Hornady Lock-N-Load AP Bullet Feeder Die – Case-Activated Bullet Placement

This bullet feeder die from Hornady is one of those accessories that seems simple but makes a surprising difference in your reloading rhythm. Instead of picking up and placing every bullet by hand, the die holds a stack of bullets and drops one into place each time a case activates the mechanism. It is gravity-fed, so there is no motor or complex electronics to worry about.

I run this on my Hornady press for 9mm and .45 ACP loads, and it consistently feeds jacketed bullets without issues. The solid steel collets grip the bullets firmly and release them cleanly. A nice bonus is that you can extend the capacity with a simple PVC tube fitted over the die body — several reloaders on forums have shared this modification, and it works well for longer loading sessions.

The collets do arrive tight from the factory. I had to work them a bit with some fine-grit sandpaper and adjust the tension before the bullets would feed smoothly. This is a one-time adjustment, but it adds to the initial setup time. Once dialed in, the die feeds reliably and has not given me trouble since.

One important limitation: this die is not recommended for lead bullets. The collets can damage soft lead tips, and lead buildup inside the mechanism will cause feeding problems over time. Stick with jacketed or plated bullets for best results. Available caliber variants include .380/9mm, .40/10mm, .45 ACP, .38/.357 Magnum, and .44 Special/Magnum.

Compatibility and Caliber Options

The die fits standard 7/8-14 thread presses, which covers most progressive models from Hornady, Dillon, Lee, and RCBS. Available variants cover the most popular pistol calibers, and changeovers between calibers require swapping the die and collet set. The quick-change design means you can swap dies in under a minute, which is faster than adjusting a single die for different bullet profiles.

Practical Tips for Best Results

Polish the inside of the collets before first use — this single step dramatically improves feeding consistency. Make sure your cases are properly flared before the bullet reaches the feeder die, as un-flared cases will cause misfeeds. If you load mixed bullet weights, you may need to readjust the collet tension when switching between profiles. For high-volume pistol reloaders, this die pays for itself in time savings within the first few thousand rounds.

5. Dillon Precision Case Feeder Plate – Caliber-Specific Feed Solution

The Dillon Case Feeder Plate is a caliber-specific component that fits inside the Dillon case feeder bowl. It is the part that actually orients and sorts your brass as the bowl rotates, so having the correct plate for your caliber is essential. This particular listing covers the small rifle variant, which handles 7.62x39mm, .22 caliber, .250 and larger calibers.

I picked up the small rifle plate for my Dillon setup when I started loading .223 Remington, and the fit was perfect right out of the box. No fitting, no filing, no adjustments needed. It dropped in and started feeding correctly on the first try. The 92% five-star rating from nearly 100 reviewers tells you this is a component that works reliably.

Dillon offers four plate variants: small rifle, large rifle, small pistol, and large pistol. Having the right plate for your caliber makes all the difference in feed reliability. The wrong plate will either let cases tip sideways or fail to pick them up at all. If you reload across multiple caliber groups, plan to pick up one plate for each group.

Which Plate Size Do You Need

Choosing the right plate comes down to the case diameter of your preferred caliber. Small pistol covers 9mm, .380 ACP, and similar. Large pistol handles .45 ACP, .44 Magnum, and 10mm. Small rifle fits .223/5.56, 7.62×39, and the .22-250 family. Large rifle is for .308, .30-06, and similar full-size rifle cartridges. When in doubt, measure your case rim diameter and compare it to the plate hole specifications.

Why Dillon Plates Stand Out

The lifetime warranty is a significant factor here. These plates are built from durable materials and designed to last indefinitely under normal use. Reloaders on forums regularly report using the same Dillon plate for years without any wear issues. The simple installation — literally dropping it into the feeder bowl — means zero downtime when switching between caliber groups.

6. Lee Precision Pro 1000/Load-Master Case Feeder Tubes – Replacement 7-Pack

These replacement feeder tubes from Lee Precision are a simple but essential consumable for anyone running a Lee Pro 1000 or Load-Master progressive press. The original tubes that come with the press are notoriously fragile, and they eventually crack or discolor from normal use. This 7-pack gives you a full set of replacements at a reasonable cost.

I have been through multiple sets of these over the years, and they do the job well. The clear plastic lets you see how much brass is left in each tube at a glance, which helps you plan your refills. They fit the Pro 1000 press perfectly and slide into the tube bracket without any forcing. Some users have noted these replacements are slightly longer than the originals, which is actually an advantage — you can preload more brass into each tube.

The main thing to be aware of is fragility. These tubes are thin-walled plastic, and they will crack if you overtighten the bracket or accidentally bump them while they are full of brass. Handle them with care during installation and removal. Several reloaders on forums recommend buying two packs at a time so you always have spares on hand.

Press Compatibility

These tubes are designed specifically for the Lee Pro 1000 and Load-Master progressive presses. They will not fit Dillon, Hornady, or RCBS presses without modification. If you run a Lee press, these are the factory-correct replacements you need. The 7-count package matches the original tube count, so you get a complete replacement set in one purchase.

Tips to Extend Tube Life

Do not overtighten the tube bracket — finger tight is sufficient. When loading brass into the tubes, avoid dropping heavy batches from height since the impact can stress the plastic. Store spare tubes in the original packaging or a protective tube to prevent cracking before use. With careful handling, a single set can last through tens of thousands of rounds.

7. Hornady 095314 Case Feeder Plate – Small Rifle Caliber Support

This is the small rifle case feeder plate from Hornady, designed for use with the Hornady Lock-N-Load automatic case feeder. It handles small rifle calibers like .223 Remington, 5.56 NATO, and similar diameter cases. At 1.6 pounds and 13 inches square, it is a substantial piece of equipment that feels built to last.

The fit in my Hornady case feeder was perfect — drop it in, and it starts working. What impressed me is that several forum members report successfully using this plate in Dillon case feeders with minor filing. The hole spacing is close enough that a small amount of material removal makes it compatible. That cross-brand utility is a nice bonus if you happen to have Dillon equipment but prefer the Hornady plate dimensions.

With an 84% five-star rating across 117 reviews, this is one of the highest-rated case feeder plates available. Users consistently describe it as a piece that should never wear out. The occasional jam at the drop point is reported by a few users, but it is not a widespread issue and usually relates to case preparation rather than the plate itself.

Calibers This Plate Handles

The small rifle plate covers .223 Remington, 5.56 NATO, .204 Ruger, .222 Remington, and similar small-diameter rifle cartridges. If you load mainly pistol calibers or large rifle calibers, you need a different plate variant. Hornady makes separate plates for small pistol, large pistol, and large rifle to cover the full spectrum.

Installation and Setup

Installation is straightforward: remove the old plate from the case feeder bowl, drop this one in, and you are ready to load. No tools required for the swap. The plate sits securely in the bowl and rotates smoothly with the feeder mechanism. If you are switching between caliber groups frequently, consider labeling each plate to avoid mix-ups during changeovers.

8. Hornady 095312 Case Feeder Plate – Large Pistol Caliber Support

This large pistol feeder plate from Hornady handles .45 ACP, .44 Magnum, 10mm Auto, and similar wide-case pistol cartridges. Like the small rifle plate above, it drops directly into the Hornady case feeder bowl and starts working immediately. No fitting, no tuning, no adjustments needed for proper Hornady compatibility.

What sets this plate apart is that it also works in Dillon case feeders right out of the box — no modification required. Multiple users confirm this cross-brand compatibility, and at a lower cost than the equivalent Dillon plate, it is a smart alternative. The USA-made construction and Hornady lifetime warranty add to the value proposition.

The only real complaints from users relate to the price point and occasional jams. The jams are infrequent and usually happen with cases that have inconsistent rim dimensions, such as mixed range brass. If you sort your brass by headstamp and trim to uniform length before feeding, you will see very few interruptions.

Best Calibers for This Plate

The large pistol plate is your go-to for .45 ACP, .44 Special, .44 Magnum, .45 Colt, 10mm Auto, and .41 Magnum. These calibers all share a similar case rim diameter that fits the plate openings correctly. For 9mm, .40 S&W, or .38 Special, you need the small pistol plate instead.

Value Compared to Alternatives

This plate offers genuine savings compared to buying the Dillon-branded equivalent while delivering the same performance. Forum discussions consistently highlight this as a smart cross-brand purchase. The lifetime warranty from Hornady matches what Dillon offers, so you are not sacrificing coverage to save money. For reloaders who work with large pistol calibers regularly, this plate is a no-brainer.

9. 4-Pack 5-Tube Universal Case Feed Support Clamp – Lee Press Tube Stabilizer

This support clamp is a small aftermarket accessory that solves a specific problem for Lee press owners. The universal 5-tube case feed magazine on Lee presses works well, but the tubes tend to flop around when loaded with brass. These clamps secure the tubes in a straight, orderly arrangement and prevent that wobble entirely.

I installed a set on a Lee Pro 1000 that had been driving its owner crazy with tube misalignment. The clamps slipped on in seconds, and the improvement was immediate. The tubes sit perfectly straight even when fully loaded, and removing individual tubes for refilling is still easy. At 4.9 stars across 35 reviews with zero cons reported, this is about as close to a universally loved product as you will find.

Compatibility covers a wide range of Lee presses: APP, Deluxe APP, Pro 1000, Pro 4000 Kit, Auto Breech Lock Pro, Load-Master, and Six Pack Pro. The 4-pack gives you enough clamps to stabilize a full 5-tube magazine with one spare. The black finish matches the Lee press aesthetic and the fit is precise without being overly tight.

Who Needs These Clamps

If you own a Lee press with the universal 5-tube case feed magazine and have noticed your tubes shifting or flopping during use, these clamps are the fix. They are especially useful for reloaders who load high volumes in single sessions, where tube stability becomes more important as brass weight adds up. For the price, it is one of the best value upgrades you can make to a Lee progressive press.

Installation Process

Installation takes under a minute per clamp. Slide the clamp onto the tube bundle, position it where you want stabilization, and it grips securely. The fit is snug enough to hold position but loose enough to slide when you apply intentional pressure. No tools, no adhesive, no permanent modifications to your press. You can remove them and transfer to another press if needed.

10. InLine Fabrication Double Bullet Tray Assembly – Dillon Press Accessory

The InLine Fabrication Double Bullet Tray is not a case feeder in the traditional sense, but it plays a supporting role that many Dillon press owners consider essential. Two large bins sit on either side of the press, giving you immediate access to sorted bullets while you work. The swing-away design means you can push the entire assembly behind the press when you need bench space.

I added this tray to a Dillon XL650 build and the installation took about 5 minutes with the included hardware. The tray mounts to the InLine Fabrication Ultramount quick-change stand, which is its primary mounting system. The construction is genuinely heavy duty — these trays do not flex or wobble even when loaded with hundreds of bullets.

The one compatibility note worth mentioning is that if you use Dillon’s own Strong Mount instead of the InLine Ultramount, you need to buy a separate adapter bracket. That adds about $20 to your total cost. The bin color is also slightly off from Dillon blue, which some users notice but most do not care about given how well the product functions.

With a 4.9-star rating across 65 reviews, this is clearly a product that delivers. Forum posts on reloading communities frequently recommend it as a “must-have” Dillon accessory. Having bullets sorted and within arm’s reach genuinely speeds up your workflow, especially during long loading sessions.

Mounting Options and Compatibility

The primary mount is the InLine Fabrication Ultramount quick-change stand. If you already use this stand, the tray bolts directly on with included hardware. For Dillon Strong Mount users, InLine sells a separate adapter bracket. The tray fits Dillon RL550B, XL650, and XL750 presses. It does not fit other press brands without modification.

How It Improves Your Workflow

Having two bins means you can sort bullets by weight class, profile, or jacket type within easy reach. The swing-away feature lets you clear the space behind the press for maintenance or caliber changes without removing the entire assembly. For reloaders who work with multiple bullet types in a single session, this organization upgrade eliminates reaching and sorting interruptions that break your rhythm.

11. Dillon 650/750 Case Feed Stop – Quick Feed Control

The Dillon Case Feed Stop is a small 3D-printed part that solves a simple but real problem: stopping the case feeder from delivering brass when you need to pause. Instead of turning off the entire feeder or letting cases pile up, you slide this stop into position and the feed halts. When you are ready to resume, pull it out and feeding continues.

The stop is 3D printed using USA-made filament in the Commonwealth of Kentucky. It snaps onto the case feed magazine tube for storage when not in use, so you always know where it is. Installation requires zero modifications to your press — it simply slides into the feed channel.

The main issue reported by users is fit on the Dillon 750. Some units may be slightly too wide by a couple tenths of an inch, requiring either light sanding or a small piece of tape to get a snug fit. With 17 reviews and a 4.4-star rating, the feedback is mixed but mostly positive. It is an inexpensive solution to a specific workflow interruption.

When You Need a Feed Stop

This accessory is most useful during mid-session pauses — when you need to clear a jam, check a powder charge, or make a small adjustment. Without it, cases continue to feed into the press during your pause, which can create a backlog or jam. If you rarely pause during loading sessions, you may not need this. For methodical reloaders who check their work frequently, it is a handy addition.

Fit and Finish Quality

The 3D-printed construction is functional but not as refined as injection-molded parts. You may see minor layer lines or surface imperfections. The Dillon blue color is a reasonable match but not exact. For the price, most users find the functionality outweighs the aesthetic compromises. If you prefer factory-finished components, this may not meet your standards.

12. Lee Precision Pro 1000/Load-Master Bullet Feeder Die and Fingers – Budget Bullet Feed

This Lee Precision bullet feeder die is one of the most affordable ways to add bullet feeding capability to a Lee Pro 1000 or Load-Master press. It includes both the feed die and small feed fingers for bullets in the .355 to .365 diameter range, covering 9mm, .380 ACP, and similar calibers. The price point is attractive for reloaders on a tight budget.

In testing, I found the die works reasonably well for standard 9mm jacketed bullets when properly adjusted. The feed fingers grip the bullet and release it into the case mouth as the press cycles. The concept is sound, and when everything is aligned correctly, it does speed up the process compared to hand-placing every bullet.

The problems show up in durability and setup. Multiple users report the feed fingers losing their springiness after a few thousand rounds, and some have experienced breakage on the first use. The setup process is finicky — getting the finger tension and die height correct takes patience and repeated adjustment. This is not a plug-and-play solution like the Hornady bullet feeder die reviewed earlier.

What Calibers Work Best

The .355 to .365 diameter range covers 9mm Luger, .380 ACP, 9mm Makarov, and similar small-bore pistol calibers. Bullet length needs to be between .60 and .75 inches. Some users report inconsistent results with certain 9mm loads, particularly 9mm Luger with longer OAL. If your bullet falls outside the specified length range, the feeder will struggle to grip it reliably.

When to Consider This Option

This bullet feeder die is best suited for budget-conscious reloaders who primarily load one caliber and are willing to accept some setup frustration in exchange for a low cost. If you load high volumes of 9mm and want to try bullet feeding without a large investment, this is an accessible starting point. For reloaders who demand reliability and longevity, the Hornady bullet feeder die (product 4) is the stronger choice despite the higher cost.

How to Choose the Right Brass Case Feeder for Your Progressive Press in 2026?

Selecting the right case feeder comes down to four key factors: press compatibility, caliber range, feed reliability, and your production volume. Let me walk through each one so you can make an informed decision based on your specific setup and goals.

Press Compatibility Is Non-Negotiable

The most important factor is matching the feeder to your press. Hornady case feeders are designed for Hornady Lock-N-Load AP presses. Dillon case feeders are built for Dillon XL650 and XL750 models. Lee feeders fit Lee Pro 1000 and Load-Master presses. Cross-brand compatibility is limited, though some plates (like the Hornady large pistol plate) can be adapted to Dillon feeders with minor modification. Before buying anything, confirm your press model and serial number against the feeder specifications.

If you are still choosing a press, our guide to the best reloading presses for beginners covers the options in detail. The case feeder decision is easier when you start with the right press platform.

Caliber Range and Plate Selection

Most case feeders use caliber-specific plates or drums that must be matched to the case diameter you are loading. A small pistol plate will not handle .45 ACP, and a large rifle plate will let 9mm cases fall through. If you reload multiple caliber groups, plan to buy the appropriate plate for each group. Hornady and Dillon both offer four standard plate sizes: small pistol, large pistol, small rifle, and large rifle.

For bottleneck rifle cartridges like .223 and .308, the rifle-specific plates are essential. Straight-wall pistol cartridges are generally easier to feed reliably across all brands. Proper case preparation also matters — make sure your brass is cleaned, trimmed, and inspected before loading it into the feeder. Our article on the best case trimmers for reloading can help with that step.

Feed Reliability and Common Issues

Feed reliability is the top concern for most reloaders, based on extensive forum discussions. The most common problems are case tipping, double-feeding, and cases failing to drop into the shell plate. These issues usually stem from incorrect plate selection, improper adjustment, or dirty brass rather than a defective feeder. Taking time during initial setup to dial in the feeder speed, gate tension, and case slide alignment pays off in long-term reliability.

Forum users on r/reloading consistently recommend starting with a slower feed rate and increasing speed gradually as you confirm consistent operation. Rushing the setup leads to frustration and wasted components. The community also emphasizes the importance of case preparation — uniform case length and clean case bodies make a noticeable difference in feed consistency. Using a quality case lubrication kit before running brass through your press helps the entire process run smoother.

Matching Your Production Volume

Not every reloader needs a full automatic case feeder. If you load a few hundred rounds a month for casual range sessions, a manual tube feed system or bullet feeder die may be sufficient. Automatic case feeders shine when you are producing 500+ rounds per session on a regular basis. The time savings compound quickly — what starts as saving a few seconds per round adds up to hours saved over a year of loading.

Consider the total investment too. A full case feeder unit plus caliber-specific plates, feed tubes, and accessories can represent a significant portion of your total reloading budget. Start with the components that address your biggest bottleneck, and add accessories over time as your needs evolve.

Maintenance and Longevity

Case feeders are low-maintenance equipment, but they do benefit from regular cleaning and inspection. Remove accumulated brass dust and debris from the bowl and feed channel periodically. Check the feed plate for wear or burrs that could snag cases. Keep the slide mechanism lubricated with a dry lubricant to avoid attracting more dust. Following these basic steps will keep your feeder running smoothly for years, and the lifetime warranties offered by Hornady and Dillon provide additional peace of mind.

FAQs

Final Thoughts on Brass Case Feeders

Finding the right brass case feeders for progressive presses comes down to matching the equipment to your press, your calibers, and your production goals. The Hornady Lock-N-Load AP Automatic Case Feeder stands out as the best overall choice for Hornady press owners who want reliable, hands-free case feeding. The Dillon XL750 Casefeeder earns the best value spot for Dillon users, offering factory integration and lifetime warranty. And for Lee press owners looking to improve their tube stability, the 4-Pack 5-Tube Support Clamp is a simple, effective upgrade at a great price.

Take time with the initial setup, use the correct caliber plate for your loads, and keep your brass clean and uniform. Those three habits will make any case feeder on this list perform at its best. Whether you are loading pistol rounds for competition practice or rifle cartridges for precision shooting, the right feeder will transform your reloading efficiency in 2026.